homeplusexpress 
Nowadays, there are so many products of 12v cooling fan 60mm red fan in the market and you are wondering to choose a best one. You have searched for 12v cooling fan 60mm red fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12v cooling fan 60mm red fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
GDSTIME 60mm x 60mm x 15mm 12v Brushless Dc Cooling Fan
Package include: 1pcs fan include mounting screws & nuts
Dimensions: 60x60x15mm
Connector:XH2.54-2Pin
Rated Voltage: DC:12V
Rated Current: 0.1 Amp
Rated Speed: 3600 RPM
Air flow: 22.7 CFM
Noise: 26 dBA
Bearing Type: Sleeve
Life: 35000 hours
Cable Lenght: 20cm or 7.8 inches
Weight: 30g or 1oz
GDSTIME 60mm Fan, 60mm x 60mm x 25mm Dual Ball Bearings 12V DC Brushless Cooling Fan
- Dimension of outer the frame is 60mm(L) x 60mm(W) x 25mm(H) / The size of fan in inch is 2.36in(L) x 2.36in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 50mm/1.7in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2Amp
- Rated Speed: 4500 RPM
- Air flow: 22.7CFM
- Noise: 36dBA
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Package include: 1 x 60mm cooling fan
- 4*M3x14mm screws & nuts( The fan is mounted by screws.)
Package include: 1pcs fan include mounting screws & nuts
Dimensions: 60x60x25mm
Connector: XH2.54-2PIN
Rated Voltage: DC 12V
Rated Current: 0.2Amp
Rated Speed: 4500 RPM
Air flow: 22.7CFM
Noise: 36dBA
Bearing Type: Dual Ball Bearings
Life: working up to 50000 hours at 25 degree
Cable Lenght: 25cm or 9.84inches
Weight: 50g or 1.76oz
Similar items with 4 stars and above
Marame 60mm Quiet Fan, 60x60x25mm Fan, 12v Cooling Fan, Brushless Computer case Fan
- Dimensions: 60 x 60 x 25 mm （2.36 x 2.36 x 1 in.） / Air Flow: 21.5CFM / Speed: 4000RPM / Noise: 32dBA
- Sleeve bearing have a lifespan of 35,000 hours and allows the fans to be laid flat or stand upright.
- Voltage Rated: 12VDC / Current Rating: 0.1A / Cable Length: 200mm
- 2 Wires: Red: ➕ ； Black: ➖ / Termination: XH 2.54mm
- Package includes 1 pieces fan with mounting screws set.
Package include:1 pieces fan with mounting screws set
Dimension: Square- 60mm L x 60mm H
Width: 25mm
Voltage Rated: 12VDC
Air Flow: 21.5CFM
Bearing Type: Sleeve
Noise: 32dBA
Speed: 4000 RPM
Termination: XH 2.54mm
Current Rating: 0.1A
Cable Length: 200mm
Similar items with 4 stars and above
HICTOP 3D Printer Turbo Fan Blower Fan 0.9M Wiring 12V DC 50mm x 15mm Cooling Fan 3D Printer Parts (2 Packs)
GDSTIME 60mm Fan, 12V 3PIN 60mm x 60mm x 10m Brushless Computer Case and CPU Cooler
- Dimension of outer the frame is 60mm(L) x 60mm(W) x 10mm(H) / The size of fan in inch is 2.36in(L) x 2.36in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 50mm/1.7in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 4.5V.
- Rated Voltage: DC 12V
- Rated Current: 0.1Amp
- Rated Speed: 3800 RPM
- Air flow: 18.5CFM
- Noise: 28.6dBA
- Power: 0.9Watt.
- Connector: 3-Pin
- Lead wire: UL Type (+): Red Wire
- (-): Black Wire. FG function：Yellow Wire. This is a three wire cooling fan. Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Package include: 1 x 60mm cooling fan
- 4*M3x14mm screws & nuts( The fan is mounted by screws.)
Package include: 1pcs fan include mounting screws & nuts
Dimensions: 60x60x10mm
Connector: 3PIN
Rated Voltage: DC 12V
Rated Current: 0.1Amp
Rated Speed: 3800 RPM
Air flow: 18.5CFM
Noise: 28.6dBA
Bearing Type: Sleeve Bearing
Life: working up to 35000 hours at 25 degree
Cable Lenght: 25cm or 9.84inches
Weight: 26g or 0.92oz
Similar items with 4 stars and above
60mm x 60mm x 15mm 6015 12V 0.8Watt Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier
- Dimensions: 60x60x15mm | 2.36 x 2.36 x 0.6inch
- Lead Wire（UL Type）: RED Wire is Positive(＋) | Black Wire is Negative(﹣).
- Allowable Ambient Temperature: -10℃ to 70℃.
- Air intake from the back and air out from the blades.
- Speed:3300RPM | Airflow: 16.5CFM | Noise: 24dBA | Bearing: Sleeve
uxcell SNOWFAN Authorized 60mm x 60mm x 15mm 12V Brushless DC Cooling Fan 0348
- 60mm DC Brushless Fan, comes with 2 bare wire
- Dimension: 60*60*15mm (2.36*2.36*0.59 inches)
- Lead Wire Length: 260mm (red+, black-)
- Bearing Type: Dual Ball Bearing
- Voltage: DC 12V
- Input (Watt): 3.36W
- Speed (R.P.M.): 5500 R.P.M. (+ / – 10%)
- Air Flow (CFM): 18.4CFM
- Fan Noise Level (dB-A): 39 dB-A
- Fan Life Expectancy: 50,000 hours
Features:
1. Higher air flow to enhance cooling performance.
2. Economic solution for perfect performance.
3. It features completely redesigned fan blades and is optimised for high static pressure.
4. The newly developed motor with a low coil temperature significantly increases the life span of the fan.
uxcell SNOWFAN Authorized 60mm x 60mm x 25mm 12V Brushless DC Cooling Fan 0357
- 60mm DC Brushless Fan, comes with 2510-2pin connector
- Dimension: 60*60*25mm (2.36*2.36*1 inches)
- Lead Wire Length: 300mm (red+, black-)
- Bearing Type: Dual Ball Bearing
- Voltage: DC 12V
- Input (Watt): 3W
- Speed (R.P.M.): 4500 R.P.M. (+ / – 10%)
- Air Flow (CFM): 27CFM
- Fan Noise Level (dB-A): 38 dB-A
- Fan Life Expectancy: 50,000 hours
Features:
1. Higher air flow to enhance cooling performance.
2. Economic solution for perfect performance.
3. It features completely redesigned fan blades and is optimised for high static pressure.
4. The newly developed motor with a low coil temperature significantly increases the life span of the fan.
uxcell SNOWFAN Authorized 60mm x 60mm x 10mm 12V Brushless DC Cooling Fan 0303
- 60mm DC Brushless Fan, comes with XH2.54 connector
- Dimension: 60*60*10mm (2.36*2.36*0.39 inches)
- Lead Wire Length: 270mm (red+, black-)
- Bearing Type: Dual Ball Bearing
- Voltage: DC 12V
- Input (Watt): 2.4W
- Speed (R.P.M.): 4300 R.P.M. (+ / – 10%)
- Air Flow (CFM): 17.45CFM
- Fan Noise Level (dB-A): 34 dB-A
- Fan Life Expectancy: 50,000 hours
Features:
1. Higher air flow to enhance cooling performance.
2. Economic solution for perfect performance.
3. It features completely redesigned fan blades and is optimised for high static pressure.
4. The newly developed motor with a low coil temperature significantly increases the life span of the fan.
HUNTERFAN HF-R6S 2.0Watt 60mm x 25mm 6025 12V 2PIN for PC Computer Cases and CPU Cooler
- Dimensions: 60x60x25mm | 2.36 x 2.36 x 1inch
- Lead Wire（UL Type）: RED Wire is Positive(＋) | Black Wire is Negative(﹣).
- Allowable Ambient Temperature: -10℃ to 70℃.
- Air intake from the back and air out from the blades.
- Speed: 4000RPM | Airflow: 21CFM | Noise: 31dBA | Bearing: Sleeve
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found 12v cooling fan 60mm red fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
