Which Is The Best 12V Dc 50Mm Radial Cooling Fan
Nowadays, there are so many products of 12v dc 50mm radial cooling fan in the market and you are wondering to choose a best one. You have searched for 12v dc 50mm radial cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12v dc 50mm radial cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
WINSINN 50mm Blower Fan 12V 5015 50x15mm Turbine Turbo Brushless Cooling for DIY 3D Printer Extruder Hotend MK2 MK3 MK7 MK8 (Pack of 4Pcs)
- ✔️Oil bearings 5015 Blower Fan – High Speed version
- ✔️️Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
- ✔️️Rated voltage: DC 12V
- ✔️️Size: 50x50x15mm
- ✔️️Made by WINSINN
►Oil bearings 5015 Blower Fan – High Speed version
►Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
►Rated voltage: DC 12V
►Line length: about 1.18in / 30mm
►4 x High Speed 5015 12V Blower Fan
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
Similar items with 4 stars and above
4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)
- ✹✹ Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).
Similar items with 4 stars and above
Wathai Brushless Cooling Blower Fan 120mm x 32mm 12V DC Centrifugal Fan High Airflow
- Package include: 1 Piece fan and mounting screws & nuts
- Rated Voltage:12V 1.0A
- Speed: 3000RPM
- Air flow: 38.5CFM
- Connecter: XH2.54-2Pin
- Cable Length: 25cm Or 10 inches
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 120mm(L) x 120mm(W) x 32mm(H) / 4.72×4.72×1.26 in. per fan
Package include: 1 Piece fan and mounting screws & nuts
Rated Voltage: 12V
Rated Current: 1.0A
Bearing type: Sleeve Bearing
Cable Length: 25cm Or 10 inches
Life: 35000 hours
Weight: 170g/pcs or 6 oz
UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm (4.72×4.72×1.26 inch)
- Dimension: 120x120x32mm
- Screw Hole Spacing: 104.5 mm±0.5
- Weight: 202g
- Connector: XH2.5-2P
- Cable Length: 20cm (8 inches)
- Noise: 61.30 dB-A
AIR FLOW-AIR PRESSURE CHARACTERISTIC
Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed.
- Max. Air Flow: 42.45CFM
- Max. Static Pressure: 41.10mm-H2O
RATED AND OPERATING CONDITLONS
- Rated voltage(VDC): 12V
- Rated current(A): 0.95A
- Rated input power(W): 11.4W
- Rated Speed(RPM/Min): 2800±10％
- Startup voltage(VDC): 7V
- Operating voltage(VDC): 7.0-14.0V
- Operating temperature(℃): -10℃-+70℃
STRUCTURE AND FORM
- Bearing: Dual Ball Bearing
- Structure: Cross flow fan
- Housing: PBT+GF30%
- Blade: PBT+GF15%
- Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec.
- Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won’t be burned within 5 sec. when Vcc &GND are exchanged.
- Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires.
- Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires
UTUO-USPTO# 86955715 – is a registered trademark protected by US Trademark Law. JUTUONIX products are sold by authorized sellers only.
By our suggestions above, we hope that you can found 12v dc 50mm radial cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best 12v dc 50mm radial cooling fan: Top-Rated Brands & What to Buy