homeplusexpress 
Nowadays, there are so many products of 3d printer heating controller in the market and you are wondering to choose a best one. You have searched for 3d printer heating controller in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3d printer heating controller which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal
3D Printer Heating Controller, 3D Printer 30A Big Current Mini Heating Controller MKS MOSFET MOS Module for Heat Bed Extruder on Board Battery Charger Extruder Controller
- High quality large heat sink ensures a better heat dissipation
- The MOS tube performance is excellent, nominal maximum current is 280A
- Maximum current can be up to 30A for stable long-term work
- Can be directly controlled by Ramp1.4 and MKS series motherboard hot bed output signal
- Can be controlled by digital signal of 5V to 24V
Features:
High quality large heat sink ensures a better heat dissipation.
The MOS tube performance is excellent, nominal maximum current is 280A.
Maximum current can be up to 30A for stable long-term work.
Can be directly controlled by Ramp1.4 and MKS series motherboard hot bed output signal.
Can be controlled by digital signal of 5V to 24V. When the power of hot bed is greater than 150W, please contact external high power module.
Specifications:
Max. Current: 30A
Size: 66.6*32mm/2.62*1.26″
Weight: 40g(approx.)
Package Includes:
1 x Control Module
BCZAMD 3D Printer Heating Controller MKS MOSFET MOS Module for Heatbed Extruder Print Head Heat Bed Mosfet Module Exceed 30A
- Each Heatbed Mosfet function has been tested.
- You can directly use the hot bed output signal control of Ramp1.4 and MKS series motherboards.
- Excellent performance MOS tube (nominal maximum current 280A).
- Large heat sink, the maximum current can be up to 30A. Can use 5-24v digital signal to control.
- After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineers of technical team will always support you here.
Feature:
The MOS module is manufactured with premium material for durable and long lasting use. This high power module is a general add-on heated bed power expansion module for 3D printer.
Equipped with large heatsink, the maximum electric current is above 30A. You can use Ramp1.4 or heatbed of MKS mainboard directly to output signal control.
Instructions:
1.Power is connected to the power supply, pay attention to positive and negative.
2.Hotbed connected to the hot bed heating line, pay attention to positive and negative.
3.Digital control signals can be connected to Gnd and D8 directly.
4.Connect the control signal from the Ramps1.4 or MKS motherboard MOS tube to Bed.
5.The two sets of control signals can only be connected to one group.
Package includes:
1 x Heat Bed Mosfet Module
ANYCUBIC 3D Printer Heating Controller MKS MOSFET for Heatbed Extruder MOS Module
- Each one has done functional test
- Superior performance of MOSFET (Max 280A)
- Extra large heat sink , the maximum current can be up to 30A or more
- Can use hot bed output signal of Ramp1.4 and MKS series to control
- Can use digital signal of 5-24v to control
Usage :
1. Connect Power to power source, please note the anode and cathode.
2. Connect Hotbed to heated wire , please note the anode and cathode.
3. Connect digital control signal to Gnd,D8.
4. Connect the control signal of Ramps1.4 or MKS MOSFET to Bed
5. Choose one signal group to connect.
package included:/b>
1 x MOS module
TRIGORILLA ANYCUBIC 3D Printer Heating Controller MKS MOSFET for Heatbed Extruder MOS Module
- ❀Extra large heat sink , the maximum current can be up to 30A or more
- ❀Can use hot bed output signal of Ramp1.4 and MKS series to control
- ❀Superior performance of MOSFET (Max 280A)
- ❀Each one has done functional test
- ❀Can use digital signal of 5-24v to control
Usage :
1. Connect Power to power source, please note the anode and cathode.
2. Connect Hotbed to heated wire , please note the anode and cathode.
3. Connect digital control signal to Gnd,D8.
4. Connect the control signal of Ramps1.4 or MKS MOSFET to Bed
5. Choose one signal group to connect.
Package Included: 1 x MOS module
ReliaBot Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module Over 30A 12V or 24V for 3D Printer
- Voltage: 12V or 24V
- Max Current: over 30A
- Maximum current of the MOSFET: 280A
- Maximum power of hot bed: Over 360W (12V) or 720W (24V)
- Make sure that the cables that connect to the controller board can withstand high current.
- We recommend using a 24V power supply when using a heated bed with high power
Packing list:
1 * Heating Controller (12V / 24V , Over 30A) for 3D Printer Hotbed
1 * 30cm signal cable for hotbed
UEETEK 3D Printer Heating Controller MKS MOSFET for Heatbed Extruder MOS Module
BIQU 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer
ReliaBot Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module 25A 12V or 24V for 3D Printer
- Voltage: 12V to 24V
- Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V)
- Make sure that the cables that connect to the controller board and hotbed can withstand high current
- We recommend using a 24V power supply when using a heat bed with high power
Note: Please mare sure the connecting is right according to the picture before power on, or the board could be damaged.
Packing list:
1 * Hot Bed Power Expansion Board
1 * Signal input cable ( From hot bed output port on mainboard to control-in on MOSFET heating controller board)
Conclusion
By our suggestions above, we hope that you can found 3d printer heating controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
