The 9 Best 3M 8810

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even across the area. A perfect match for our range of small heat sinks, either in aluminum or copper.

Comes in a square of 80mm x 80mm (3" square) – but can be cut into any shape or size.

For more information about 3M's 8810 thermal tape check out the datasheet

Heat Sink Thermal Tape – 3M 8810 – 80mm x 80mm ( 0:13 )

Specification:
Dimension: 30mm x 25m
Thickness: 0.2mm
Reinforcement Carrier : Fiberglass Mesh
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Heat Resistance: 120°C (long time), 180°C ( short time)
Applicable temperature range:-30~+120 °C

Application:
Electronics Components: IC、CPU 、MOS …….
LED、M/B、P/S 、Heat Sink 、LCD -TV 、Notebook PC 、PC、Telecom Device、Wireless Hub
DDR Module 、 DVD Applications 、 Hand-set Application

Features:
★ Good adhesion (Acrylic PSA)
★ Very good thermal conductivity
★ Soft and compressibility
★ Easy to assemble
★ Long lifetime working : normal temperature(80-120℃ ) can work for a minimum of 5 years

Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it’s little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.

Package included:
1 Roll Thermal Conductive Double-sided Tape

Includes 15 pieces anodized black aluminum+ 5 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 , 3 B+ and 4 boards. These pure aluminum (15 pcs) and copper (5 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5 pcs aluminum heat sink 0.56 x 0.39 x 0.27 inch(14mm x 10mm x 7mm); 5 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)

A thermally conductive adhesive tape that is made of advanced thermal conductive PSA and glassfiber with high adhesion. You can quickly stick electronic component to heat sink with this tape. Flexible enough to fit unevean surface.Eco-friendly and non-toxic

Typical Application

1. Attach LED strip light, Rigid LED bar, LED module light to installation surface like wall, under cabinet, aluminum channel system, etc
2. Stick heat sink to VRM IC CPU GPU, Video Card RAM, DDR Memory Modules
3. Attach LCD module,screen to metal frame bezel
4. Water block attachment

Specification

• Substrate: Glass Fabric
• Adhesive Layer Material: Thermally Conductive PSA
• Thickness: 0.3 mm
• Release Liner backing: PE Film
• Adhesion (N/25mm): 12~18 N/25mm
• Short Term Temperature Resistance :120C / 248F
• Long Term Temperature Resistance: 80 C / 176F
• Thermal Conductivity: 1.2 W/m-k
• Breakdown Voltage: 3KVAC

Product Specification:

Glass fiber thickness: 0.1mm

Thermal Conductivity:1 W/m-k

Breakdown Voltage: 3KVAC

Thermal impedance : 0.3℃in2/w

Adhesive power:6.5 N/cm

Volume resistance: 3X1013ohm/cm

Applicable temperature range:-20~+120 °C

Main Features:
Aikenuo thermal conductivity double-sided adhesive With Thermal conductivity, strong stickiness, softness, Insulation, Non-conductive, wear-resistant,
fire-retardant, compression, buffering, no damage to metal materials, etc features, Can fill the uneven surface, be tightly and firmly fit the heat source devices and heat sink,
Has strong adhesive strength, effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor.

Applicable industry:
LED industry, automotive electronics industry, power industry, PDP/LED flat-panel TV,
communications industry, Industrial industry, household electrical appliance industry.

Widely Applied:
electronic products, motherboard, motor, external pad and foot pad, electronic, appliances,high power LED lighting,Car machine,
power devices, automotive electronic modules (engine scrubber) Power modules,
high power power supplies, computer host (CPU, GPU, USICS, RDRAMTM, CD-ROM, IGPT module, hard drives) ,laptop and any electronic equipment needing to be filled with heat dissipation.

Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (30~+150 °C ) can work for a minimum of 5 years.

Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.25mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.5kg/inch

Package included:
1 Roll Thermal Tape

Thermally Conductive Adhesive Transfer Tape- 3M 8810, is a 10.0 mil thermally stable industrial grade tape product used to create heat transfer paths from heat generating components to heat sinks or other cooling devices. In addition to providing excellent thermal conductivity, this product will provide electrical insulation between the bonded substrates. Featuring a pressure sensitive adhesive, this tape will not require any heat trea ent to bond surfaces.

10 pieces 20x20x10mm anodized black aluminum heatsink include pre-applied heat conductive adhesive tape for optimum heat transfer and easy installation. These heat sinks kit can be applied on devices to cool LED, FPV transmitter, processor, regulators, VRAM VGA RAM, IC Chips etc.

Material: Black Anodized Aluminum

Dimension: 0.79 x 0.79 x 0.39 inch / 20x20x10mm (L*W*H)

Weight: 0.25 oz / 7 gr per pc

Package includes:10 pieces anodized aluminum heat sink

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m 8810, eg:

• What are Top 10 3m 8810 for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m 8810 to buy?
• What are Top Rated 3m 8810 to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m 8810?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m 8810.
• Before deciding to buy any 3m 8810, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m 8810 and What you should consider when buying the 3m 8810 and Where to Buy or Purchase the 3m 8810. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m 8810 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m 8810.

Conclusion

By our suggestions above, we hope that you can found 3m 8810 for you.Please don’t forget to share your experience by comment in this post. Thank you!