homeplusexpress 
Nowadays, there are so many products of 4 inch inline fan hydroponics exhaust cooling duct fan in the market and you are wondering to choose a best one. You have searched for 4 inch inline fan hydroponics exhaust cooling duct fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 4 inch inline fan hydroponics exhaust cooling duct fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
AC Infinity CLOUDLINE T4, Quiet 4” Inline Duct Fan with Temperature Humidity Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
- Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
- Mixed flow design combined with a PWM-controlled DC-motor for a truly quiet and energy efficient performance.
- Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
- Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an DC-motor with PWM-control for a quiet and energy efficient performance. Includes an intelligent controller that features advanced programming and functions. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, all necessary mounting hardware, and a corded AC plug adapter.
Intelligent Controller
The controller can be programmed to adjust fan speeds to respond to varying high and low temperatures, and humidity. For ventilation applications, the controller can be set to run continuously, or triggered to run at customizable speeds when given power, due to its backup memory capability. Additional features includes a countdown timer, alarm system, and eco-mode. Includes detachable 12-foot precision water-resistant probe.
Quiet and Energy Efficient Design
Unlike common duct fans that uses an AC-motor which are loud and unmanageable, this duct fan features an DC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
AC Infinity CLOUDLINE S6, Quiet 6” Inline Duct Fan with Speed Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to quietly ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks.
- Features an inline speed controller utilizing PWM which can precisely optimize the fan’s speed without generating noise.
- Mixed flow design combined with a DC-powered motor for a truly quiet and energy efficient performance.
- Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware.
- Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 351 CFM | Noise: 32 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
The duct fan system is designed to quietly cool AV equipment rooms and closets, and to ventilate various air circulation and exhaust projects. Features an inline speed controller utilizing PWM-technology. Contains a mixed-flow design and DC-motor for a quiet and high static-pressure performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one duct fan unit, one inline speed controller, installation manual, all necessary mounting hardware, and a corded AC plug adapter to power the unit through a standard outlet.
Precise Speed Controller
The inline speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. Unlike common AC-powered duct fans that suppresses voltage to control fan speeds, this duct fan features a DC-motor that is precisely controlled using PWM (Pulse Width Modulation). This technology enables the fan’s motor to be able to run smoothly at extremely low RPM speeds without generating motor noises and heat as seen on variable voltage controllers. Eight speed options are available with power switch, and backup memory. This S6 model can be connected to the smart controller of the CLOUDLINE T6 (AI-CLT6) model to share the same programming and power source.
Quiet and Energy Efficient Design
The inline fan features a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
AC Infinity CLOUDLINE T6, Quiet 6” Inline Duct Fan with Temperature Humidity Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
- Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
- Mixed flow design combined with a PWM-controlled DC-motor for a truly quiet and energy efficient performance.
- Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
- Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 351 CFM | Noise: 32 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an DC-motor with PWM-control for a quiet and energy efficient performance. Includes an intelligent controller that features advanced programming and functions. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, all necessary mounting hardware, and a corded AC plug adapter.
Intelligent Controller
The controller can be programmed to adjust fan speeds to respond to varying high and low temperatures, and humidity. For ventilation applications, the controller can be set to run continuously, or triggered to run at customizable speeds when given power, due to its backup memory capability. Additional features includes a countdown timer, alarm system, and eco-mode. Includes detachable 12-foot precision probe that is water resistant. Can connect to an additional CLOUDLINE S6 fan to share the same programming and power source.
Quiet and Energy Efficient Design
Features an DC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
VIVOSUN 4 inch Inline Duct Booster Fan 100 CFM, HVAC Exhaust Intake Fan, Low Noise & Extra Long 5.5′ Grounded Power Cord
- HOUSEHOLD APPLICATIONS: Help to boost airflow in HVAC units to remove exhausts and odors from bathrooms & workshops and ventilate basements & attics, etc.
- UPGRADED ADVANTAGES: Superior balanced blades for long service life & quiet operation
- Motor features a permanently lubricated bearing that operates quietly and requires no maintenance
- Portable and lightweight
- Sufficient 5.5′ grounded power cord
- SPECS.: Diameter 4 inch, Speed 2930 RPM, Air Flow 100 CFM, Voltage 110/120V, Power 12W
- GROW ROOM APPLICATIONS: Used as intake fan to bring fresh air into grow rooms
- Also used as exhaust fan in smaller setups with LEDs or Lights under 400W.
- NOTE: Max Operating Temp of Motor is 130℃ / 266℉
- Max Ambient Temp is 60℃ / 140℉. If any other materials/particles get into the duct fan and get the blade stuck, users are to turn off the power immediately, clean it up, turn the power back on when handled properly.
AC Infinity CLOUDLINE S4, Quiet 4” Inline Duct Fan with Speed Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to quietly ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks.
- Features an inline speed controller utilizing PWM which can precisely optimize the fan’s speed without generating noise.
- Mixed flow design combined with a DC-powered motor for a truly quiet and energy efficient performance.
- Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware.
- Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
The duct fan system is designed to quietly cool AV equipment rooms and closets, and to ventilate various air circulation and exhaust projects. Features an inline speed controller utilizing PWM-technology. Contains a mixed-flow design and DC-motor for a quiet and high static-pressure performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one duct fan unit, one inline speed controller, installation manual, all necessary mounting hardware, and a corded AC plug adapter to power the unit through a standard outlet.
Precise Speed Controller
The inline speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. Unlike common AC-powered duct fans that suppresses voltage to control fan speeds, this duct fan features a DC-motor that is precisely controlled using PWM (Pulse Width Modulation). This technology enables the fan’s motor to be able to run smoothly at extremely low RPM speeds without generating motor noises and heat as seen on variable voltage controllers. Eight speed options are available with power switch, and backup memory. This S4 model can be connected to the smart controller of the CLOUDLINE T4 to share the same programming and power source.
Quiet and Energy Efficient Design
The inline fan features a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
VIVOSUN 4 Inch 195 CFM Inline Duct Ventilation Fan Vent Blower for Grow Tent
- EFFECTIVE VENTILATION: Powerful blower with a fan speed of 2930 RPM for an air flow of 195 CFM. Moves air through your target location efficiently for optimal ventilation
- EFFICIENT DESIGN: Lightweight, compact fan takes up minimal space
- ideal for applications where larger fans just won’t fit. Efficient flow deflector feature increases air flow while cutting noise output.
- LOW NOISE LEVEL: Fitted with a flow deflector that concentrates the fan stream and cuts turbulent kinetic energy to reduce sound output to just 30 dB
- EASY INSTALLATION: Flanges on both the intake and exhaust ends for simple and easy hookup and a cord length of 5.9 feet for hassle free setup.
- VERSATILE APPLICATIONS: Use anywhere that would benefit from improved air flow to reduce humidity, clear the air and lower temperatures in grow rooms, greenhouses, basements or kitchens
- Can be used with a variable speed controller (bought separately)
4" Inline Fan – 100 CFM, Metal Duct Booster Fan, ETL Listed, Pre-Wired 6 FT Grounded Cord – Great for Grow Tent Exhaust and Intake, Register Booster for 4 Inch Ducts
- 4IN INLINE FAN FOR GROW TENT VENTILATION: Use It As Intake Fan to Bring Fresh Air to Grow Tents or Rooms. Can Be Used as Exhaust Fan in Smaller Set Ups with LEDs or CFL Lights.
- HOUSEHOLD VENTILATION: This Versatile Inline Duct Fan Is Designed To Exhaust and Intake Air Through 4″ Ducts, Serve as Register Booster Fan to Improve Airflow from HVAC Units to Remote Register Vents, Exhaust Odors in Bathrooms, Workshops, Ventilate Stale Air in Basements and Attics, Etc.
- IN LINE FAN SPECS: Airflow 100 CFM, Power 18W, Voltage 120V/110V, Speed 2600 RPM. ETL Listed, Compatible with Certain Speed Controllers. For Indoor Use Only in Environment With Max Temperatures Not Exceeding 140F.
- PACKAGE CONTENTS: 4 Inch Duct Fan, Instructions Manual. 4 Inch Diameter x 7.25 Inch Length, 6 Foot Grounded Power Cord.
- WARRANTY: This Inline Duct Fan is Covered by 1 Year Warranty. Contact Us through Amazon For Service.
Goplus Inline Duct Fan Quite Inline Duct Booster Hydroponics Exhaust Cooling Fan Blower Ventilation Strong 118CFM (4 Inches, with Variable Speed Controller)
- High Quality—Durable plastic fan housing and blades for extremely low noise
- Premium Ventilation—Quickly and efficiently move vast amount of air
- Temperature Control and Speed Control—Cooling rooms that tend to accumulate too much heat or hot spots, and the speed controller for adjusting fan speed to desired level.
- For Air Purification—Removing a large amount of air pollutants and bacteria
- Easily to Assemble—Extended collar and lip for easy duct hook-up
- Perfect for Any Environment-Commercial or residential
Similar items with 4 stars and above
TerraBloom ECMF-100-R, Quiet 4" Inline Duct Fan with Wireless Remote Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor. Heating and Cooling Booster and Exhaust Blower for Growing
- Powerful airflow and extreme energy efficiency – ECMF series 4” inline fans are perfect for heat and humidity exhaust in grow tents, dryer duct booster and odor control applications.
- Built with aerodynamically optimized mixed-flow impellers in a compact, air tight metal casing and powered by a fully speed adjustable EC motor.
- Each fan comes with a wireless remote variable speed controller, CR2023 battery for wireless remote, AC power cord and mounting hardware.
- Wireless remote works within 50ft range even through walls, floors and ceilings and offers 6 speed settings. Fan stores your speed selection and resumes at it after power shut offs.
- Duct Diameter: 4” * Airflow: 160 CFM * Power 18W * Noise: 28-56 dBA * Pressure: 334 Pa * Bearings: Dual Ball * Size: 7.3 x 4.9 x 6.9 in. * ETL Listed
Similar items with 4 stars and above
TerraBloom 4” Quiet Inline Duct Fan, 188 CFM with Built-in Variable Speed Controller, ETL Listed, Pre-Wired – for Heating, Cooling, Ventilation, Airflow Booster, Hydroponics, Grow Tents
- Effective ventilation blower for small to medium grow set ups, HVAC air boosting, heat, exhaust of heat, odor, humidity.
- Built-in variable speed controller allows to select any output between 60% and 100%. Motor Uses 60W.
- Mixed-flow design and quiet motor generate 188 CFM and sound output of 32 dBa (ducted).
- Designed with removable duct ends and locking tabs. Pre-wired (6FT) for easy installation. Includes mounting bracket.
- Duct Size: 4 in. | Dimensions: 11.5 x 8 x 8 in. | Airflow: 188 CFM | Noise: 32 dBA | Motor: 60W, AC, Brushless | Max Environment Temperature: 140°F.
Conclusion
By our suggestions above, we hope that you can found 4 inch inline fan hydroponics exhaust cooling duct fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
