homeplusexpress 
Nowadays, there are so many products of outdoor misting cooling system replacement heads in the market and you are wondering to choose a best one. You have searched for outdoor misting cooling system replacement heads in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings outdoor misting cooling system replacement heads which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Sywon 40 Pack Brass Misting Nozzles Replacement Heads for Garden Patio Lawn Landscaping Dust Control and Outdoor Cooling Mister System, 10/24 UNC
- HIGH EFFICIENCY: Operation Pressure:20-70kg/cm. Flow Rate:80-145ml/min
- DURABLE MATERIAL: Made of brass with good quality
- Rust-free and durable. High cost performance: 38pcs+2pcs (Extra Spare) =40pcs
- 0.012” DIA. ORIFICE: The orifice of these misting nozzles is 0.012 inch/0.3 mm in diameter, which fits for low pressure mister system
- EASY TO INSTALL: Easily screw into any 10/ 24 UNC threaded mist nozzle opening
- WIDE USAGE: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
uxcell Brass Misting Nozzle – 10/24 UNC 0.8mm Orifice Dia Replacement Heads for Outdoor Cooling System – 10 Pcs
- [MATERIAL] – Made of brass with stainless steel orifice, anti-rust and durable.
- [EASY TO INSTALL] – Easily screw into any 10/ 24 UNC threaded mist nozzle opening.
- [LEAK-PROOF] – Self-sealing o-ring included with each nozzle, no tape or sealant is required.
- [TECHNICAL PARAMETERS] – 0.031″ (0.8mm) orifice diameter, 3-70kg working pressure, 110-480ml/min flow rate.
- [WIDELY USED] – Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place.
The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
Specification:
Material: Brass, Stainless steel
Thread size: UNC 10-24
Orifice Diameter: 0.8mm / 0.031″
Pressure: 3-70 kg/cm
Flow Rate: 110-480 ml/min
Total Size: 9.5mm x 10mm / 0.37″ x 0.39″ (Max.D*H)
Package Content:
10 x Misting Nozzles
20 Pack Brass Misting Nozzles Replacement Heads, Low Pressure Atomizing Misting Sprayer for Patio Lawn, Landscaping, Dust Control, Outdoor Cooling Mister System, 0.016"(0.4mm) Orifice, 10/24 UNC
- High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water
- Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc.
- Dimension: Thread size is UNC 10-24, Orifice diameter is 0.4mm
- Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening
- Leak-proof, self-sealing o-ring included with each brass nozzle
- no tape or sealant is required
The misting nozzle is made of a sturdy brass with stainless steel orifice, does not need to use air compressed, can fully spray with the pressure of tap water
The misting nozzle can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage. It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog, garden, patio, greenhouses, spraying disinfectant, landscaping, lawn misting systems and other humidification place
The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging
Package includes:
20 x Brass misting nozzles
Note:
Manual measurement, please allow slight deviation on size
20 Pack Brass Misting Nozzles Replacement Heads, Low Pressure Atomizing Misting Sprayer for Patio Lawn, Landscaping, Dust Control, Outdoor Cooling Mister System, 0.012"(0.3mm) Orifice, 10/24 UNC
- High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water
- Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc.
- Dimension: Thread size is UNC 10-24, Orifice diameter is 0.3mm
- Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening
- Leak-proof, self-sealing o-ring included with each brass nozzle
- no tape or sealant is required
The misting nozzle is made of a sturdy brass with stainless steel orifice, does not need to use air compressed, can fully spray with the pressure of tap water
The misting nozzle can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage. It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog, garden, patio, greenhouses, spraying disinfectant, landscaping, lawn misting systems and other humidification place
The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging
Package includes:
20 x Brass misting nozzles
Note:
Manual measurement, please allow slight deviation on size
NewAir Outdoor Misting Fan Oscillating Pedestal Fan with Three Gentle Mist Nozzles, AF-520B, Black
- Durable construction to weather outdoor elements
- Offers enough cooling coverage for nearly 500 sq. ft. of patio space allowing you to enjoy a refreshing outdoor setting and keep the backyard area comfortable
- Oscillated for widespread coolin and misting
- Push button controls are user-friendly
- Tilting head and adjustable height allows for targeted misting.Frequency: 60 Hz
The NewAir AF-520B 18 inch outdoor misting fan offers cooling breezes for up to 500 Sq.’. Of patio space. With a Black finish that complements outdoor decor, this misting fan offers a flexible design – adjust the height and tilt to reach areas that need it most. The oscillating fan head ensures full coverage, with 3 fan speeds to maintain the proper level of comfort. Air flow capacity 2400 cfm
uxcell Brass Misting Nozzle – 10/24 UNC 0.8mm Orifice Dia Replacement Heads for Outdoor Cooling System – 5 Pcs
- [MATERIAL] – Made of brass with stainless steel orifice, anti-rust and durable.
- [EASY TO INSTALL] – Easily screw into any 10/ 24 UNC threaded mist nozzle opening.
- [LEAK-PROOF] – Self-sealing o-ring included with each nozzle, no tape or sealant is required.
- [TECHNICAL PARAMETERS] – 0.031″ (0.8mm) orifice diameter, 3-70kg working pressure, 110-480ml/min flow rate.
- [WIDELY USED] – Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place.
The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
Specification:
Material: Brass, Stainless steel
Thread size: UNC 10-24
Orifice Diameter: 0.8mm / 0.031″
Pressure: 3-70 kg/cm
Flow Rate: 110-480 ml/min
Total Size: 9.5mm x 10mm / 0.37″ x 0.39″ (Max.D*H)
Package Content:
5 x Misting Nozzles
Yotako Misting Nozzles Kit 12x Brass Mister Nozzles 0.3mm 10/24 UNC+ 10x 1/4” Slip-Lok Misting Nozzle Tees+ 1x Plug, Fog Nozzles for Patio Misting System Outdoor Cooling System Garden Water Mister
- 【Renew Misting Set up】– Operation Pressure: 20-70kg/Cm, Flow Rate: 80-145ml/Min, Working pressure: 30- 450PSI, Best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, umbrella, patio mister systems, outdoor misting misters cooling system,drip irrigation kit
- 【Mister Nozzles】– 10/24 UNC thread, 0.012” (0.3 mm) orifice, stainless steel brass body, self-sealing o-ring included, leak-proof no tape or sealant is required
- 【Misting Nozzle Tees】– Slip lock quick pushing, fit for 1/4” misting systems,great used for water cooling,it can delivers very fine mist to significantly cool the air in the hottest summer weather
- 【Maintain Fog Nozzles】– Hard water, lime and calcium may clog the fogger nozzles, Clean nozzles periodically by soaking them in vinegar & warm water solution, Replace sediment filters (not included), Remove them at the end of the season
- 【Package】– 10 x Slip-Lok Misting Nozzle Tees, 12 x Nozzles, 1 x End Plug,those misting cooling system directly use tap water to spray and cool down, no electricity,and can save 70% of water when compare with manual watering on irrigation you
Bluecell 8pcs High Pressure Brass Misting Nozzles Fogging Spray Head for Outdoor Cooling System, 0.016" Orifice (0.4mm) 10/24 UNC Thread
- Package including 8pcs High Pressure Atomizing Sprayer
- !!!NOTE: Operation Pressure: 30-80kg/cm2 (430-1140 PSI), optimal operating pressure, please ensure that these Fogging Spray Heads is suitable for your misting system before purchase.
- Nozzle: 0.016 inches (0.4 mm) orifice, screw into any 10/24-threaded mist nozzle opening
- Made of Brass, never Rust, best choice for outdoor use with cold water. Suitable for high-pressure spray system.
- Perfect for garden watering, greenhouse nursery, Landscaping, spray disinfection and Outdoor Cooling Mister System, etc.
There is an internal spring loaded check valve.
Included in the Package: 8pcs x Brass Misting Nozzles
Specifications:
Material: Brass
Color: As pictures show
Thread: 0.016 inches
Total length: 1 inch
Orifice: 0.4mm
Operation Pressure: 30-80kg/cm2(430-1140 PSI)
Flow Rate: 115-185ml/min
Minimal water use of 1/2 gallon of water per hour per nozzle.
uxcell Brass Misting Nozzle – 10/24 UNC 0.1mm Orifice Dia Replacement Heads for Outdoor Cooling System
- [MATERIAL] – Made of brass with stainless steel orifice, anti-rust and durable.
- [EASY TO INSTALL] – Easily screw into any 10/ 24 UNC threaded mist nozzle opening.
- [LEAK-PROOF] – Self-sealing o-ring included with each nozzle, no tape or sealant is required.
- [TECHNICAL PARAMETERS] – 0.004″ (0.1mm) orifice diameter, 35-70kg working pressure, 10-30ml/min flow rate.
- [WIDELY USED] – Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, small fountain, etc.
This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place.
The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
Specification:
Material: Brass, Stainless steel
Thread size: UNC 10-24
Orifice Diameter: 0.1mm / 0.004″
Pressure: 35-70 kg/cm
Flow Rate: 10-30 ml/min
Total Size: 9.5mm x 9mm / 0.37″ x 0.35″ (Max.D*H)
Package Content:
1 x Misting Nozzle
Conclusion
By our suggestions above, we hope that you can found outdoor misting cooling system replacement heads for you.Please don’t forget to share your experience by comment in this post. Thank you!
