Best Kenmore Dryer 11086873800 Heating Element

OEM Factory Part. 4391960

Product Description

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 4391960 Element.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 4391960 Element

SPECIFICATIONS:

The 3392519 Dryer Thermal Fuse replacement part by PartsBroz is engineered for use in dryers. This fuse acts as a safety device that stops the flow of electricity to the heating element (or heater coil) when dryer overheats. When this fuse trips or becomes faulty, your dryer will not start or it won’t heat properly. This is a one time fuse and cannot be re-set. It must be replaced when there is no continuity between its terminals. It’s very simple to test the fuse for continuity if you have an ohmmeter or a multimeter and are familiar with how to use it. Because the fuse is so inexpensive, many people that do not have a meter opt out to simply replace it instead based on the symptoms. For example, if your dryer is too noisy, this fuse is not the likely culprit. On the other hand, if your dryer won’t start or does not produce any heat, it is very likely that this fuse is the problem. The fuse has two 3/16 inch male terminals and is attached to two 3/16 female terminals on the dryer blower wheel housing. Blown fuses can be caused by clogged dryer vents and we highly recommend checking to make sure that all of the vents are clear of lint when replacing the fuse. Vacuum cleaner comes pretty handy when cleaning dryer vents. And, as always, when dealing with electricity, you must insure that the power is shut off to your appliance before performing any repairs or disassembly. This dryer thermal fuse is fairly simple and quick to replace and is a good reminder to keep your dryer vents clean.

Works with most top name brand dryers: Whirlpool, Sears, Kenmore, Roper, KitchenAid, Maytag, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef.

Fixes the following symptoms:

No heat or not enough heat
Dryer won’t start
Too hot
Takes too long to dry
Won’t shut off
Timer won’t advance
Dryer won’t tumble
Control Panel / Touch Pad won’t respond

From Napco’s Web Site: NAPCO has served the HVAC and appliance industry for over 24 years. NAPCO’s mission is to manufacture proprietary heating elements in the US and supply high quality generic heating elements in conjunction with supporting heater components to the appliance and HVAC service industry. Our focus is heating elements and related accessory parts. We will continue to be the leader in manufacturing USA made replacement parts.

This is a dryer heating element replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, and Crosley. If your dryer does not heat first, check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element if defective. Rated 240 volts and 5400 watts. It replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Conclusion

By our suggestions above, we hope that you can found kenmore dryer 11086873800 heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!