Which Is The Best 40 Gallon Hot Water

Product Description

Thermwell SP57/11C Water Heater Blanket. Fits up to 60-gallon water heater. 3-Inch tall by 48-inch wide by 75-inch tall

From the Manufacturer

The Frost King SP57/11C Water heater Insultion Blanket is fibergalss and foil on both sides for supreme insulation and fits most gas, oil or electric water heaters. Includes foiltape for easy installation. The reflective value is rated at 10.

Using the “Patented” Reflective Foil Hot Water Tanks Heater Jacket stops 97% of Radiant Heat loss! Heating the Water in your Hot Water Tank at home is the second largest energy consumption next to Heating and Cooling Air. Your Hot Water Tank continues to work even when you are at work, sleep or on holidays. As the water cools down due to the loss of heat, your Hot Water tank starts up again to maintain a desired temperature. The cost savings using a Hot Water Heater “Reflective-Foil Jacket” are immediate and also helps prolong the life of your Hot Water Tank. The Patented “Reflective Foil” is 3/16” thick which has a single layer of polyethylene bubbles sandwiched between two highly reflective surfaces. It is specifically designed to reduce the amount of radiant heat transfer. NOTE: This product is exclusively made and Tested for JR Global Sales ‘Only’ and anyone else selling this product is NOT authorized to do so and is sending another product that may NOT have been ‘Tested’ and may not be ‘Fire Rated’. If the product is NOT sold by JR Global Sales than it is NOT the same product that is being offered here. If the product is ‘Sold Out’ and not in stock by JR Global Sales than replenishment stock is on its way. Thank you Also available in our 50-60 Gallon Kit, https://www.amazon.com/dp/B00Z7NNXNQ

The heat electric tank less water heater S-16 model has the capacity of heating 3.5 gpm which is the equivalent to 2 showers (at 1.5 gpm each), and 1 sinks (at 0.50 gpm each) simultaneously, or any combination which equals to 3.5 gpm. The S-16 can handle these applications in the warmer climates of the us which are Florida, Georgia, Louisiana, Texas, Arizona, California, Alabama, and Mississippi. Anything north of these States the S-16 model can be used for point of use, or 1- application at a time. A good rule of thumb is if you live in the southern States mentioned here the S-16 can power a 3 to 4 bedroom 2-1/2 bathroom home, including dishwasher and clothes washer, please keep in mind that tank less water heaters are designed to heat incoming water at a maximum output temperature based on simultaneous use and inlet water temperatures. So if your demand for hot water decreases your output water temperatures will increase, as well as if you live in the colder States this S-16 will heat less volume of water, this will cause the S-16 to be used in point of use applications in the colder climates.

This compact , yet powerful unit – with gas inputs up to 140,000 BTU per hour – can meet all the hot-water needs of a small to medium American home or apartment. Designed to virtually do anything a 40-gallon tank-type water heater can do and much more The Wall mounted Excel Pro is design to work with hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances. LCD Display Control: Just set the desired water temperature The Excel Pro has an energy factor of 0.84-0.85. Excel Pro: Modulating Technology Tankless water heaters can be further divided into two categories according to their heating capability: “full on/full off” versus “modulating”. Full on/full off units do not have a variable power output level; the unit is either fully on or completely off. This can cause an annoying and possibly hazardous variation of hot water temperature, as the flow of water through the heater varies. Modulated tankless water heaters change their heat output in response to the flow rate of water running through the unit. The Excel Pro comes with a display panel where you can set the output temperature and regardless of water flow the unit modulates the fire power. Pure Copper Heat Exchanger * As used by other top of the line tankless gas water heater manufacturers like Rinnai, Takagi, Rheem and Noritz. Features & Benefits Super compact 14.5″ x 23″ x 5.5″ size 84%+ thermal efficiency 140,000 BTU maximum input 6.6 gallons/ minute capacity at 35F degree rise Minimum activation flow rate of 0.5 gpm Electronic ignition. Has a Power vented fan that Vents directly vertically or horizontally with 3” stainless steel flue 3′ long flue and elbow included. Can be used in recirculation and space heating application . Delivers 6.6 gpm of hot water with a 35°F Instant Temperature Rise (Equivalent to 5.5gpm with a 45F temp Rise). European Model Digital Display is in Celsius.

Saves up to 20% of your Water Heating Energy bills, adds R-5 to tank performance Lightweight and Easy to Install, Fits Most Gas, Oil and Electric Hot Water Heaters for a 40 Gallon tank, Kit Includes Spacers, Foil Tape and Insulation Hypo-Allergenic Kit, Indoor Air Quality Rated and Non Toxic, No Skin, Eyes or Throat Irritation Passes Stringent California Water Heater Insulation Fire Test, Class1, Class A Fire Rated Increases Recovery Rate of Tank During Cycles, mold and mildew resistant unaffected by humidity and moisture

40 gallon, electric, medium, dual 5500W, 240V elements, 3″ insulation, 95 energy factor, recovery at a 90 degrees rise-gallons/hours 25, first hour rating 56, t & p valve, pex polymer lined heat trap nipples, pex dip tube, glass lined tank, duel mag anode rod, unit dimensions: 22″d x 50″h, 12 year tank & parts warranty, meets new naeca 2015 efficiency standards.

Conclusion

By our suggestions above, we hope that you can found 40 gallon hot water for you.Please don’t forget to share your experience by comment in this post. Thank you!