Best 10 Micron Fuel Filter Water

Brand new, genuine Yamaha Marine Fuel/Water Filter, MAR-FUELF-IL-TR. This is a factory original equipment part, not aftermarket.

Yinlowa Spin-on Fuel and Water Separator Filter With Nylon Collection Bowl and Fittings For Racor R12T S3240 12AT NPT ZG1/4-19

Features:
– This fuel filter r12t combo kit includes fittings needed. Direct replacement for the broken one!
– Coated with a durable electrostatically applied powder coating for superior corrosion resistance.
– These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
– Traps 92% of harmful water or contaminants, your engine will perform better than ever with clean, water-free fuel

Specifications:
– Filter Rating: 10 Micron
– Maximum Flow Rate: 30 GPH (57 LPH)
– Port / Connecting Size: M18 X 1.5 Center Thread
– OEM Part Number: Replaces Racor R12T 120AT S3240

Instruction for R12T Water Separator and Filter Complete Combo:
1). Nylon collection bowl down when installed the water separator and filter.
2). This separator marine filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3). Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4). All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.

Buy with Confidence. Any question? Please don’t hesitate to contact us!

This item for sale is a brand new Yamaha Fuel/Water Filter.
Yamaha PN: MARM10EL0000 (replaces MAR-MINIF-IL-TR and MARMINIFILTR)

Yamaha Part #MAR-MINIF-LT-AS

Mini 10-Micron Fuel/Water Separator Filter Assembly
Replaced by new # MAR-M10AS-00-00

Package Quantity = 1

Brand new, genuine Yamaha Marine Fuel Filter, MAR-MINIF-IL-TR. This is a factory original equipment part, not aftermarket.

Sierra 18-7866 10 Micron, High Capacity Fuel Water Separator Filter for Yamaha MAR-FUELF-IL-TR

DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline • Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Replaces: Yamaha MAR-FUELF-IL-TR
• Filter Size: High Capacity – 6″ or 152.4 mm
• Rating: 10 Micron
• Flow: 90 GPH

ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today’s high horsepower engine demands while withstanding the harsh marine environment.

SIERRA’S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.

Check out these genuine Yamaha MAR-FUELF-IL-TR Fuel/Water Separating Filters. When it comes to the lifeblood of your recreational vehicle, why take chances with a substitute manufacturer? Give your investment the protection it deserves with authentic Yamaha outboards. *Yamaha outboard models of 115 HP or less may require the MAR-MINIF-IL-TR Fuel/Water Separating filter. This is completely up to the boat manufacturer and dependent on available space in the boats transom. If you are unsure, please check your current set-up before purchasing. Thanks!

CASE OF 12 NEW RACOR 2020SM (10 MICRON) REPLACEMENT FILTERS FOR 1000 SERIES TURBINE FUEL FILTER WATER SEPARATOR SYSTEM

UTSAUTO R12T Fuel Filter Water Separator

Specification:

• Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
• Maximum Flow Rate 30 GPH (57 LPH).
• Port / Connecting Size M18 X 1.5 Center Thread.
• These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
• Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.

Feature:

1. Don’t be caught in the water without one of these Diesel spin-on filters.
2. Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3. The inlet and out let can be feed in on the same side or in one side out the other side.
4. Check and replace regularly.

R12T Water separator & filter complete combo installation instruction:

1. Nylon collection bowl down when installed the water separator and filter.
2. This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports.
3. If you need to use two plugs, you must install them to the filter and tighten them.
4. Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
5. All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.

Conclusion

By our suggestions above, we hope that you can found 10 micron fuel filter water for you.Please don’t forget to share your experience by comment in this post. Thank you!