homeplusexpress 
Nowadays, there are so many products of car amp with cooling system in the market and you are wondering to choose a best one. You have searched for car amp with cooling system in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings car amp with cooling system which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2 4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
- WIRING INSTALLATION KIT: 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
- WIRING INSTALLATION KIT CONTINUED: 10 5/16″ and 1/4″ Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4″ Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
- AMPLIFIER POWER: 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry
- DIMENSIONS: The R1100M is 9. 1 inches in Depth, 10. 4 inches in Width and 2. 3 inches in Height. It weighs 4. 4 lbs.
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
BOSS Audio R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Monoblock, MOSFET Power Supply, Remote Subwoofer Control
Similar items with 4 stars and above
BOSS Audio Systems AR4000D Class D Car Amplifier – 4000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply
- POWER: 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms
- CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- STRAPPING CAPABLE: You are able to strap TWO AR4000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- VARIABLE SUBSONIC FILTER: To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- DIMENSIONS: The AR4000D is 14.3 inches in Depth, 6.5 inches in Width and 2.8 inches in Height
- WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com
Kick your Bass into high gear with the Boss Audio Armor AR4000D Class D Monoblock Amplifier. This powerful 1-Ohm stable Amplifier features 4000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR4000D for a total power of 8,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR4000D. For further product details, please scroll down.
Similar items with 4 stars and above
AC Infinity AIRCOM T10, Quiet Cooling Blower Fan System 17" Front-Exhaust, for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.
- Contains three dual-ball bearing blowers with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Front | Airflow: 160 CFM | Noise: 24 dBA
AC Infinity MULTIFAN S5, Quiet Dual 80mm USB Fan for Receiver DVR Playstation Xbox Computer Cabinet Cooling
- Ultra-quiet USB fans designed to cool various electronics and components.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
- Dimensions: 3.2 x 3.2 x 1 in. per fan | Total Airflow: 52 CFM | Total Noise: 18 dBA | Bearings: Dual Ball
Product Description
The ultra-quiet cooling fans can be positioned to stand upright or laid flat to cool various electronics and components. Features a multi-speed controller with power switch. Includes eight large anti-vibration rubber feet per fan and a 6-foot power cord. The USB plug can be plugged into the USB ports found behind popular electronics such as receivers and video game consoles. The two fans are permanently connected by a 2.5 feet cord and share the same multi-speed controller. Each unit contains an additional USB port, up to four fans can be daisy chained together to share the same power source. Certified by CE and RoHS.
Speed Controller
The fan includes an in-line multi-speed controller with power switch to set the fan’s speed to optimal noise and airflow levels for various environments.
Connecting Additional Units
For electronics and components that requires more airflow, each fan unit can daisy chain additional MULTIFAN S series fans. Up to four fans can share the same USB power source; and up to six fans can share the same thermal controller (sold separately). MULTIFAN S1, S2, S3 and S4 contains one fan, and MULTIFAN S5 and S7 contains two fans.
Applications
This ultra-quiet cooling fan is popular in a variety of electronics and components such as receivers, DVRs, video game consoles, modems, computers, amplifiers, and other audio video equipment.
Rockville 3000 Watt Peak / 800w RMS 2 Channel Power Amplifier Pro/DJ Amp (RPA9)
- Rockville RPA9 3000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier. 2U rack space.
- Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers.
- Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers.
- Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls.
- Power, signal, overload, clipping, and protection LED indicators on front of amp.
- Heavy duty rack mount ears with handles. Built-in dual high velocity quiet cooling fans.
- Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity.
- Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (5A, 250V).
- Frequency Response: 20Hz to 20KHz <
- +/- 0.5dB. Distortion: <
- 0.03%. Input Impedance: 20K Ohm Balanced and 10K Ohm Unbalanced.
- Signal to Noise Ratio: >
- 102dB. Power Requirements: 120V / 50-60Hz. Weight: 17.19 lbs. Dimensions: 18.97″ x 13.97″ x 3.54″.
Power Ratings:
RMS Power Output:
Stereo 8 Ohm: 2 x 250W
Stereo 4 Ohm: 2 x 400W
Bridged 4 Ohm: 1 x 800W
Peak Power Output:
Stereo 8 Ohm: 2 x 1000W Max
Stereo 4 Ohm: 2 x 1500W Max
Bridged 4 Ohm: 1 x 3000W Max
Terminals:
Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
RCA A & B Inputs
Output Terminals:
Banana binding post speaker output
Speakon output
XLR direct output
Features:
Rockville RPA9 3000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
2U rack space
Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers
Channel A & B Clipping Led Indicators
Channel A & B Separate Level Controls
Power, signal, overload, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles
Built-in dual high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm Speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
User serviceable fuse (5A, 250V)
Frequency Response: 20Hz to 20KHz 102dB
Power Requirements: 120V / 50-60Hz
Weight: 17.19 lbs
Dimensions: 18.97 x 13.97 x 3.54 inch
8-Channel Microphone System Powered Mixer – 800 Watts Power Peak AUX (3.5mm) Input Connector SD Memory Card & USB Flash Drive Readers 5-Band Graphic Equalizer LCD Display w/ Cooling Fan – Pyle PMX802M
- 8 BALANCED INPUTS: Pyle 8 channel system powered mixer has (8) balanced microphone inputs and (8) 1/4″ line/high impedance inputs. The product is equipped with <10Hz – 150Hz (-1dB) frequence response at +10 to +60dB gain range
- 800 WATTS POWER: Pyle powered mixer provides up to 800-watt max power at 4 ohms on each channel. It also contains an electronic crossover network, adjustable high/ low-level inputs, and stereo RCA line-level inputs
- 3.5mm INPUT JACK: Pyle power mixer has 3.5mm aux input connector jack that works with all of your favorite devices such as iPod, MP3 players, iPhone, smartphones, tablets, and etc. The product also has master system EFFX, EQ and volume controls
- MULTIMEDIA READERS: The product offers USB flash and SD memory card readers. Simply load your card or flash drive and connect to your unit to get started. The product has built in 5-band graphic equalizer so you can easily take control of the sound
- COOLING FAN: The product is built in with cooling fan to ensure the safety of mixer while playing. It also has an LCD screen with touch button controls perfect for controlling the audio at social gatherings
Product Description
PylePro Model : PMX802M
8-Ch. Stage Powered Pro Audio Mixer
8-Channel Powered Mixer – Pro Audio Stage & Studio Sound Mixer, MP3/USB/SD Readers, AUX (3.5mm) Input, Digital LCD Display (800 Watt)
Features:
What’s in the Box:
Technical Specs:
The Pyle PMX802M is your PA mixer and amplifier solution. This 800 watt, 8-channel system provides total sound control and is perfect for controlling the audio at social gatherings. Connect it all; features include eight balanced microphone inputs, eight high-impedance microphone/line inputs, audio line input for connecting Smartphones or MP3 players and a pair of RCA audio jacks for connecting additional devices like CD players or tape recorders. Additional features include independent channel volume and equalizer controls, master effects control with echo, delay, 5-band graphic equalizer, LCD digital display screen and more! Take control of the sound, and the crowd, with the Pyle PMX802M.
From the Manufacturer
00W Power Mixer W Mp3
Pioneer GM-A6704 4-Channel Bridgeable Amplifier with Bass Boost,Black/red
4-Channel Bridgeable Amplifier with Bass Boost. New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins.
AC Infinity AIRCOM T9, Quiet Cooling Fan System 17" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.
- Contains three dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Top | Airflow: 210 CFM | Noise: 21 dBA
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The LCD digital controller on the front of the system features a smart thermostat with speed control and status alerts. The steel enclosure houses three dual-ball bearing fans that pulls heat out of the component and exhausts upwards. Its slim low-profile design enables the unit to fit in tight spaces. On the backside are ports to connect and control additional fans. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
Programming includes an easy-to-use thermostat and a SMART mode that automatically adjusts the fan’s speed to react to varying temperatures. Additional features include alarm alerts, fan failure triggers, power savings setting, display lock, and backup memory. Six fan speeds are available with three screen brightness settings. Behind the unit are ports that can control up to six individual AC Infinity AIRPLATE Cabinet fans and MULTIFAN Component fans.
Design and Construction
Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
Rockville RXA-T1 1500 Watt Peak/370w CEA Rated RMS 2 Channel Amplifier Car Stereo Amp
- Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD.
- RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms).
- High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz – 250Hz. High Pass Filter: 15Hz – 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry.
- 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator.
- High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power:200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions: (W x H x L) 8.5? x 1.8? x 13?.
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXA-T1 is a 2 channel high power amplifier with 1,500 Watts peak output, 750 Watts RMS output (2 x 375 @ 2 Ohms) and 500 Watts RMS (2 x 250 @ 4 Ohms). You can also bridge the amplifier and get 1 x 750 Watts RMS @ 4 Ohms. The CEA-2006 compliant rating is 125 x 2 @ 4 Ohms and 185 x 2 @ 2 ohms <1% thd.="" most="" brands="" do="" not="" use="" cea="" compliant="" ratings="" because="" quite="" simply="" they="" do="" not="" want="" you="" to="" be="" able="" to="" compare="" their="" amps="" to="" others="" on="" the="" market.="" over="" here="" at="" rockville,="" we="" want="" you="" to="" be="" able="" to="" compare="" our="" amps="" to="" any="" brand="" on="" the="" market.="" for="" this="" reason="" we="" are="" supplying="" you="" with="" multiple="" ratings.="" the="" cea="" compliant="" rating="" should="" be="" used="" when="" matching="" up="" or="" comparing="" this="" amplifier="" to="" other="" cea="" compliant="" brands="" such="" as="" kicker,="" rockford="" fosgate,="" alpine,="" etc.="" we="" also="" supply="" an="" rms="" rating="" which="" should="" be="" used="" when="" comparing="" with="" great="" brands="" that="" are="" not="" cea="" compliant="" such="" as="" hifonics,="" earthquake,="" powerbass,="" etc.="" the="" peak="" rating="" is="" simply="" what="" the="" amplifier="" can="" hit="" for="" a="" split="" second="" at="" the="" highest="" point="" of="" a="" song.="" this="" rating="" from="" any="" brand="" is="" not="" really="" important.="" rms="" and="" cea="" ratings="" truly="" are="" the="" most="">
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found car amp with cooling system for you.Please don’t forget to share your experience by comment in this post. Thank you!
