The Best Dewalt Twin Stack Air Compressor

Amazon.com

The DEWALT D55153 Hot Dog Compressor has all the power of a large compressor, but constructed as a smaller, lighter unit. It delivers 3.8 cubic feet per minute at 100 psi and is durably built with oil-lubricated cast-iron cylinder. Included with the Hot Dog Compressor is the regulator and an initial fill of DEWALT synthetic air compressor oil.

From the Manufacturer

The D55153 1.1-horsepower electric compressor packs all the air you’ll need plus high-quality features into a small, lightweight unit. Delivering 4.5 cubic feet per minute at 100 psi, this stacked tank unit with U.S. fittings and an overload-protected motor is designed to exceed any contractor’s expectations. The D55153 is oil-lubricated with a cast-iron cylinder to ensure that it is built for long life. Regulator is included. The compressor includes the initial fill of DeWalt synthetic air compressor oil.

Features

• 4.5 cubic feet per minute delivered at 100 psi, enables speedy recovery
• Oil-lubricated pump improves durability
• Dual soft-start valves assist in cold weather startup
• 4-gallon twin-stack tank design offers proven acceptance in the market
• Cast-iron cylinder enhances pump life

Specifications

• Drive: direct drive
• Horsepower: 2-3/4 max hp
• Tank size: 4 gallons
• Power supply: 120-volt AC, 15 amps, 60 Hz, 2-pole induction motor
• Cubic feet per minute at 100 psi: 4.5 cfm
• Pump speed: 3,400 rpm
• Tool length: 18 inches
• Tool width: 18.5 inches
• Tool height: 16.75 inches
• Tool weight: 56.5 lbs.
• Shipping weight: 60 lbs.

Includes

• DeWalt synthetic compressor oil
• Pressure regulator

Warranty
This DeWalt high-performance industrial tool comes with a warranty package that includes:
30-day, no-risk satisfaction guarantee
One-year free service contract
One-year warranty

Product Description

Portable electric powered compressor with 1.1 HP, High output motor. 4 gallon twin stack tank design. Lightweight design improves portability. Oil lubricated pump improves durability. Low voltage start-up perform on jobsites without blowing breakers and start under low voltage conditions. Improved and protected drain valve. Improved ergonomics for better weight distribution and balance for easy carrying. Asme approved tank and CSA certified. Oil lubricated for longer life. 3.2 CFM delivered at 100 p.S.I. Enables quick recovery. 120V operation. 14A. 53 lb. Portable electric powered compressor with 1. This product is manufactured in china. This product meets customer requirement.

Amazon.com

The DEWALT D55151 Hot Dog Compressor has all the power of a large compressor, but constructed as a smaller, lighter unit. It delivers 3.2 cubic feet per minute at 100 psi and is durably built with oil-lubricated cast-iron cylinder. Included with the Hot Dog Compressor are a 2/8 inch regulator and an initial fill of DEWALT synthetic air compressor oil.

See all Product description

Product Description

Featuring heavy duty construction the Black and Decker 1.1 HP Dolly Compressor is a 4 gallon electric wheeled dolly styled air compressor with panel that offers easy, hassle-free use. Features a 4.0 CFM delivered at 90 PSI pump providing rapid recovery, oil lubricated pump improving durability and cast iron cylinder enhancing pump life.

Amazon.com

Whether your crew is laying down roofing, finishing up a framing project, or putting trim in place to complete a big start-to-finish construction job, the oil-lubricated DeWalt D55154 Heavy-Duty Electric Air Compressor offers convenience and dependable performance. Continuous power provided by the 1.1 HP induction motor delivers 4.0 SCFM at 90 PSI and 125 PSI Max. Combined with two conveniently placed universal quick couplers that make it easy to run several tools at the same time, this output ensures that multi-person woodworking crews won’t be disappointed by this four-gallon compressor. For increased efficiency, the compressor features an oil pump that has been rotated 90 degrees to make oil changes quick, and it offers a convenient ball drain valve that makes thorough tank draining a simple task.

Because professional craftsmen and women know how important it is the have tools that are both durable and easy to handle, this compressor features a unique wheeled dolly-style and a sturdy cast-iron construction, complete with a roll-cage frame that protects the pump and motor from being damaged on the job. The tank assemble is also structured to protect the couplers and gauges from wear and tear and the 3/4 foot is designed to stay attached in the face of tough use, increasing the life of this tool. Fully pneumatic tires, a frame-clearance of 2.5-inches, and a telescoping handle make moving this compressor around a jobsite easy on your body, and a top-load panel with positioning holes allows you to load up to 100 pounds on to the deck of this tool for transport.

See all Product description

DEWALT DWFP55126 6 Gal 165 PSI Pancake Compressor features a high efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less]. It also offers a 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump, which enables long tool run time with quick recovery. The high flow regulator and couplers maximize air tool performance, and a long life oil free pump for maintenance free operation. This unit offers a soft 75.5 dBA noise level for a quiet work setting. A console cover protects controls and is removable to allow easy repair. This unit also features 2 universal couplers to easily support two users, and a ball drain valve for quick & thorough tank draining. It has protective rubber leg covers to prevent marring. It has a convenient cord wrap for easy storage, and its 30 lb weight makes it quite easy to carry/store. Please confirm that the drain valve is fully closed before using the compressor.

Product Description

Vertical stand feature and collapsible handle allows user to save space by transporting or storing the compressor in a vertical position. 5. 0 SCFM (standard cubic feet per minute) @ 90 psi (pounds per square inch) allows the compressor to recover quickly after its initial tank charge is exhausted. 78 dB (decibel) operational noise level for a quieter work environment. 10″ non-flat foam tires allow for easy transport. Efficient high pressure technology allows for longer pump and motor life. Oil-free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension code (12 gauge or heavier, 50 ft. or less) due to consistent amp draw requirement of the compressor. High flow coupler allows for maximum nailer performance. Metal console panel provides a display area as well as protects the gauges, couplers, and regulator. High flow coupler allows for maximum nailer performance. 2″ gauges allow for an easy to read surface. 1 year limited . Vertical stand feature and collapsible handle allows user to save space by transporting or storing the compressor in a vertical position. This product is manufactured in United States. This product meets customer requirement.

Amazon.com

DEWALT built the D55146 Heavy Duty 4.5 Gallon, 225 PSI, Heavy Duty Hand Carry Compressor with Wheels is quiet, efficient and solidly built; constructed to withstand harsh jobsite conditions. Its dual connections allow users to simultaneously operate up to 3 framing nailers or 2 roofing nailers. This versatile compressor is useful to both small framing carpenters & remodelers and large trim carpenter crews & remodelers alike. The unique, patented high efficiency motor and high pressure pump provide a maximum pressure of 225 PSI with 5.0 SCFM @ 90 PSI so you never lose pressure. The D55146 is convenient, with an oil free, maintenance free pump and is easy to move & store with pneumatic wheels. It’s the perfect compressor to choose if you need a lot of power and a low maintenance tool.

See all Product description

DEWALT DWFP55130 Heavy Duty 200 PSI Quiet Trim Air Compressor

Product Description

The product is GAL 135PSI Compressor. Easy to use. The product is manufactured in United States.

Amazon.com

The DeWalt D55140 One-Gallon, Max 135-PSI Trim Compressor is a one-person tool that offers efficiency and dependability. This indispensable hand-carry compressor features a lightweight, compact design and quiet operation for punch-out work. Ideal for finish carpenters and woodworkers, the D55140 can be used for remodeling and custom installation of shelves or other furniture, cabinet trim installation, pressure-testing new plumbing lines, and more.

The DeWalt D55140 Max 135-PSI Trim Compressor At a Glance: 2.6-Amp motor; 90 – 135 PSI Quiet 69-dB rating Durable oil-free pump Compact and portable at 24 pounds

Control panel features universal connection for use with any pneumatic tools. View larger.

Portability and quiet operation make the compressor especially versatile.

Versatile, High-Performance Compressor
Whether you’re testing plumbing lines or making quick work of a remodeling project, the D55140’s high-performance operation simplifies trim work and other jobs.

The D55140 features a one-gallon tank and a 2.6-amp motor that delivers 0.75 SCFM at 90 PSI and 135 PSI max, which makes for high-surge performance and quick recovery. Additionally, the draw motor offers easy startup and reduced breaker tripping, as well as a high-flow regulator that provides maximum air pressure to increase jobsite performance. And running at 69 dBA, the D55140 provides end users with a quieter operation compared to the competition.

The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for you to check or refill the pump, and it also helps keep your jobsite clean by preventing oil from transferring to your work surface.

Exceptionally Durable for Long Life
The efficient and unique design of the D55140 ensures maximum durability and longevity. DeWalt built the heavy-duty cast-iron compressor with an innovative roll cage and a full-protection frame designed to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection of key compressor components.Compact, Lightweight Design for Easy Portability
Measuring 24 pounds and with a height of just nine inches, the D55140 is ideal for those who prefer hand-carry compressors. For further convenience, DeWalt equipped the D55140 with a one-hand, universal quick connection for easy-to-use operation with any of your pneumatic tools. And for increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and with a convenient cord wrap for easy storage.

What’s in the Box
135-PSI compressor and manual.

See all Product description

INCLUDES: 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor DEWALT Compressor OilFEATURES: 4.0 CFM delivered @ 90 PSI pump provides rapid recovery Oil lubricated pump improves durability Cast iron cylinder enhances pump life High-flow regulator for increased performance 4 gallon twin stack tank design with proven acceptance in the market Dual soft start valves assist in cold weather start-upSPECIFICATIONS: HP: 1.1 Drive: Direct Tank Size: 4 Gallon Power Supply: 120V AC, 15 amps, 60 Hz.,2 pole induction motor CFM @ 100 PSI: 3.8 CFM Pump Speed: 3,400 RPM

Amazon.com

Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.

View larger

MAC2400 Features PERFORMANCE – Cast-iron cylinder with greater bore and stroke for maximum performance DURABILITY – Runs at a lower RPM (1,720) resulting in greater motor and pump life RELIABILITY – Low AMP draw reduces instances of tripped breakers CONVENIENCE – Oil drain and oil sight glass conveniently located for easy access and maintenance INCLUDES – Oil and 1/4″ universal quick coupler

Tool Specifications Horsepower 2.5 Pump Oil-lubricated Tank 4.2 “Twin Stacked” gal. Performance 90 PSI: 4.2 cfm 40 PSI: 4.8 cfm Maximum Pressure 0 – 130 PSI AMPS 12.3 Noise Level 79 dB Size 19-3/8″x18-3/4″x18″ Net Weight 77 lbs.

2.5 HP with Big Bore Engineered Pump
The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita’s commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors
Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What’s in the Box
Makita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.

From the Manufacturer

The new MAC2400 – Twin Stack air compressor by Makita is blowing away the competition. With built-in features such as a super quiet motor that draws only 12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. It delivers 4.2CFM @ 90PSI and is equipped with a lever handled ball valve drain system to get rid of condensation build up in the tank . The exclusive finned discharge tubing increases heat dissipation while reducing moisture in the lines and the easily removable cast iron cylinder reduces wear for increased pump life. High quality, maximum performance – just what you expect from Makita.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt Twin Stack Air Compressor, eg:

• What are Top 10 Dewalt Twin Stack Air Compressor for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt Twin Stack Air Compressor to buy?
• What are Top Rated Dewalt Twin Stack Air Compressor to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt Twin Stack Air Compressor?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt Twin Stack Air Compressor.
• Before deciding to buy any Dewalt Twin Stack Air Compressor, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt Twin Stack Air Compressor and What you should consider when buying the Dewalt Twin Stack Air Compressor and Where to Buy or Purchase the Dewalt Twin Stack Air Compressor. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt Twin Stack Air Compressor of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt Twin Stack Air Compressor.