homeplusexpress 
Nowadays, there are so many products of 3dprinter heating block in the market and you are wondering to choose a best one. You have searched for 3dprinter heating block in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3dprinter heating block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
MakerHawk 5pcs Aluminum Heater Block for MK7 / MK8 3D Printer and 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and 5pcs 12V 40W 620 Ceramic Cartridge Heater for 3D Printer
- 3d printer heater block: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
- 12V 40W 620 Ceramic Cartridge Heater: Resistance: Material: 304 stainless steel
- Lead wire: 0.3 square
- 2080 high temperature resistant high quality oxide powder.
- NTC 3950 100K Thermistor: For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
- Resistance value at 25°C=100K
- Cartridge Heater: The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
- We have a strong after-sales team, if you have any questions, please feel free to email us. Click on “MakerHawk-US”,then “Ask a question”.We will reply to you as soon as possible. Thank you for your cooperation!
3d printer heater block:
Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes: 3mm diameter
Suitable for Makerbot printer
12V 40W 620 Ceramic Cartridge Heater:
Material: 304 stainless steel
Lead wire: 0.3 square
Resistance: 2080 high temperature resistant high quality oxide powder
Application:
1 Semiconductor chamber heating
2 Semiconductor wafer lead connection
3 Semiconductor wire and die bonding
4 Freeze protection and deicing of equipment in cold climates or applications
5 Humidity Control
6 Patient Comfort heating used in medical devices
7 Mold die and platen heating
8 Seal bars used in packaging equipment
9 Test sample heating in gas chromatography
NTC 3950 100K Thermistor:
For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon / PTFE
Package Including
5 * 3d printer heater block
5 * 12V 40W 620 Ceramic Cartridge Heater
5 * NTC 3950 100K Thermistor
Zomiee 5pcs 30MM Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Heads + 5pcs Aluminum Heater Block Extruder Kit for MK8 M6 Makerbot Reprap 3D Printers
- [Throat Tube] – Outer Thread – M6
- Inner Diameter – 2mm
- Length – 30mm
- Filament Diameter – 1.75mm
- Material – Stainless Steel.
- [Nozzle] – 0.4mm Extruder Brass Nozzle Print Head: Color – Golden
- Material – copper (brass)
- Size – 5*13mm
- Input Diameter: 1.75mm
- Output Diameter: 0.4mm.
- [MK8 Aluminum Heater Block] – Dimensions: 20*20*10mm(L*W*H)
- Material: Aluminum.
- [Compatibility] – Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
- [Combine Pack] – 5pcs 30MM Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Head + 5pcs Aluminum Heater Block
Specification of Brass Nozzle:
Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Compatible: compatible with all 1.75mm PLA ABS printer, works with Anet A8.
Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel
Specification of Aluminum Heater Block:
Material: Aluminum
Dimensions: 20*20*10mm(L*W*H)
Net Weight: 6g/pcs
Inner hole for install screw: M6 and M3 (heat pipe and thermocouple)
Package:
5 x MK8-0.4mm Brass Nozzle
5 x M6*30MM Extruder 1.75mm Tube
5 x MK8 Aluminum Heater Block
2 x Hex Key Wrenches
MK8 Extruder Nozzles Kit for 3D Printer 5 Pcs Aluminum Heater Block +5Pcs 1.75mm Extruder Throat Tube M6 Thread +5Pcs 0.4mm Brass Nozzle +5Pcs Cotton Heater Tape for Makerbot MK7/MK8 Prusa i3 CR-10
- ❃❃ Designed for many common types of 3D printers such as Makerbot MK7/MK8, Prusa i3 etc. Solid aluminium construction with aperture.
- ❃❃ Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament.
- ❃❃ Aluminium Heater Block for Extruders in 3D-Printers. A 6mm drilling with an M3 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M3 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M6 thread for the Nozzle.
- ❃❃ This stainless steel barrel has continuous thread so it is more universal than our standard barrel. It also has been drilled out larger at one end and a piece of PTFE teflon tube(Not included) can be inserted to reduce the chances of “barrel lock” which can stop filament feeding resulting in a failed print and otherwise only solved with the oily rag trick
- ❃❃ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better.
Specification of Heater Tape:
Length: 62mm
Width: 20mm
Thickness: 2mm
Specification of Brass Nozzle:
Type: 0.4mm Extruder Brass Nozzle Print Head
Color: Golden.
Material: Brass
Size:5*13mm
Input Diameter:1.75mm
Output Diameter:0.4mm
Specification of Extruder Tube:
Type: Nozzle Throat Pipe
Compatibility:3D Printer
Outer Thread: M6
Length:30mm
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Filament Diameter:1.75mm
Material: Stainless Steel
Specification of Heater Blocks:
Name: Metal Part
Color: Silver
Size:20*20*10mm
Screw: M6 and M3
Heating: 6mm
Package list:
5PCS X Heater Tape
5PCS X Brass Nozzle
5PCS X Extruder Tube
5PCS X Heater Blocks
WINSINN 3D Printer Sensor Heater Block, Compatible with E3D V6 J-Head RepRap Bowden Hotend Extruder for HT-NTC100K PT100 – Aluminum (Pack of 5Pcs)
►This heater block works with our New Standard thermistor sensor for V6… Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your V6 HotEnd, or a Type-K Thermistor cartridge, instead of a thermistor.
►These heater blocks are extremely similar to the standard V6 heater block, but instead of a hole sized for a thermistor with a clamping washer these blocks have a hole sized for the PT100 sensor, and use an M3 grub screw to quickly and easily secure or release the sensor.
——————————————————————————————————————–
►For V6
►Compatible HT-NTC100K PT100 sensor
►Suitable nozzle: M6 Screw thread
►Material: Aluminum alloy
►Size: 23*16*12mm
———————————————————————————————————————
Package include:
►5 x V6 Sensor Heater Block
►1 x Allen wrench
;———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
3D Printer Nozzle Heater Kit, Aluminum Heater Block +1.75mm Extruder Teflon Throat Tube M6 Thread +0.4mm Brass Extruder Nozzle +Silicone Heater Socks for E3D V6 Makerbot RepRap 3D Printers (20 PCS)
- ❃❃ This stainless steel barrel has continuous thread so it is more universal than our standard barrel. It also has been drilled out larger at one end and a piece of PTFE teflon tube(Not included) can be inserted to reduce the chances of “barrel lock” which can stop filament feeding resulting in a failed print and otherwise only solved with the oily rag trick
- ❃❃ These blocks are engineered for ultimate high temperature performance. These blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolworks EDGE.
- ❃❃ These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
- ❃❃ With silicone socks on will stop heat loss and unstable temperatures for good. Insulated with high-temperature silicone, this E3D v6 heater block kit will maintain a stable temperature much better.
- ❃❃ Come with 5 Pcs 0.4mm nozzle, which made of solid and durable high precision brass material, it is wear resistant, can provide a long service life.
Specification of Silicone Heater Socks:
Material: Silicone
Size: 20*16.5*12.5mm
Specifications of the Extruder Heat BreakTube:
Material: stainless steel
Overall length: 22mm
Upper Thread: M7 (Heatsink end)
Lower Thread: M6 (Heater block end)
Filament size: 1.75mm
Specification of Brass Nozzle:
Type: 0.4mm Extruder Brass Nozzle PrintHead
Color: Golden.
Material: Brass
Input Diameter:1.75mm
Output Diameter:0.4mm
Specification of Heater Blocks:
Name: Metal Part
Color: Silver
Size: 20*16*12mm
Screw: M6 and M3
Heating: 6mm
Thermocouple: 3mm
Package list:
5PCS X Brass Nozzle
5PCS X Extruder Tube
5PCS X Heater Blocks
5PCS X Silicone Heater Socks
CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10
KINGPRINT Aluminum Heat Block for 3D V6 J Head 3D Printer Specialized for MK7 MK8 3D Printer Extruder (Pack of 5pcs)
Specifications：
Plate thickness: 1.0mm-10mm
Material Capabilities: Aluminum
output power: 15w(Max)
Size: 16*16*12MM
Package Included:
5*Aluminum Heater Block
BIQU Aluminum Heater Block Specialized for MK7 MK8 3D Printer Extruder(Pack of 5pcs)
Specifications:
-Material: Aluminum
-Dimensions: 20*20*10mm(LWH)
-Net Weight: 7g/pcs
-Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
-Heater Mounting Hole: 6mm diameter
-Thermocouple Mounting Holes:3mm diameter
-Suitable for Makerbot printer
Package Included:
5*Aluminum Heater Block
Conclusion
By our suggestions above, we hope that you can found 3dprinter heating block for you.Please don’t forget to share your experience by comment in this post. Thank you!
