homeplusexpress 
Nowadays, there are so many products of beer tower cooling fan in the market and you are wondering to choose a best one. You have searched for beer tower cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings beer tower cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Coldtower Kegerator Super Tower Cooler (Upgraded for MAXIMUM cooling)
- IP56 rated dust and water resistant 50,000 hour 34 CFM BLOWER (not a weak computer box fan like you will find in economy tower coolers)
- Professional 1A Power Supply with ON/OFF Switch and Extra Long 10 Foot Cord (not a cheap cell phone charger with a 3 foot cord, like you will find in economy tower coolers.) Costs Next to Nothing to Run
- Upgraded 1/2″ hose is the perfect diameter to supply a steady stream of cold air into the tower, and allow ample return air into the kegerator. Larger diameter hoses, like those used in economy tower coolers, restrict the flow of return air into the kegerator, resulting in inefficient cooling of the tower. We have done our research, and the 1/2″ hose coupled with our powerful blower will cool your beer tower better than any other tower cooler on the market!
- Factory Injection Molded Design Provides Durability and Protects Blower from Moisture and Icing
- Full 1 year warranty against defects on all units bought after 1-1-2017! Our prices are our every day prices. We do not run phony “sales” like our competitors. Their every day price is the same as their “sale” price. This is done to make customers think they are getting a deal.
Coldtower Kegerator Tower Coolers are professionally designed tower coolers. Our Super Tower Cooler utilizes a powerful ball bearing 34 CFM blower, rated for 50,000 hours of operation, 1/2″ air hose, blower box air diffusers, and an on/off switch on the 10 foot long power cord. The 34 CFM blower and 1/2″ air hose provide unmatched cooling capabilities. The air diffusers keep blower noise to a minimum, while also maintaining a more uniform temperature throughout the kegerator and helping to prevent the common problems of ice buildup on the cooling plate, frozen beer lines, and slushy beer when the keg gets low. Use the power switch to turn the already long life 50,000 hour blower off when not drinking beer, and your Coldtower will easily outlast your kegerator! We spent a lot of time and money researching and developing our tower coolers to give you the best possible product. Economy tower coolers cannot compare! For the coldest beer possible and the perfect amount of head, harness the power of Coldtower! *See pictures and bullet points for more details.
Improved Kegerator Tower Cooler – Coldpour 2
- Circulates cold air into the beer tower to reduce foam caused by warm tower
- Includes power adapter, switch, and all necessary mounting hardware
- Simple assembly and installation – either screw fan to wall or zip-tie to beer line with included hardware
- Ball bearing fan is powerful and quiet with a long life span
- Full 1 year warranty
The Coldpour 2 kegerator tower cooler draws cold air from the bottom of the kegerator and pushes it into the beer tower. This helps prevent the beer from warming/foaming up in the line. It also helps keep the entire kegerator at a more even temperature.
Kegerator Tower Cooler for Beer Tower – Neoprene Design – Perfect Fit for Kegerator Tap Tower – Easy to Use Beer Tower Cooler Accessory (3.0" Diameter x 11.5" Height Double Tap Beer Tower)
- MAINTAINS ICY COLD BEER TOWERS: Ensure that every pour from your draft beer tower comes out icy cold. Even the first! Insulate your tower with this simple to use kegerator Tower Cooler accessory.
- END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Tower Cooler Chiller. Beer warms rapidly through a poorly insulated beer tower causing foam to form…in your cup!
- SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Tower Chiller will reduce kegerator energy consumption.. Unlike kegerator tower cooler fans, the Tower Chiller takes seconds to install.
- MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator and protect your beer tower.
- HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers.
BEER TOWER COOLER INSULATOR – EXTRA-THICK (4 mm) NEOPRENE COVER (DARK GREY) FOR SINGLE-TAP BEER TOWER – EXTRA-WIDE (1.2”) HOOK-&-LOOP FASTENER – FITS TOWERS 3” WIDE 12.5”-13.5” HIGH – BEERGON 1-TAP
- KEEP YOUR BEER ICY-COLD WITH BEERGON BEER TOWER COVER – Enjoy icy-cold beer right out of the first drop. This beer tower cooling system features EXTRA-THICK (4 millimeters) Neoprene fabric technology for the ultimate insulation and protection of your beer tower
- BEST INSULATION = NO CONDENSATION! – We know how much you hate that condensation on your beer tower. Not anymore! The heat-proofing that this beer tower accessory provides prevents any condensation. In addition, our beer tower cover protects your tower from splashing beer.
- BEERGON BEER TOWER INSULATOR fits beer towers measuring 3” in diameter with one tap. The cover is made of stretchable fabric and can fit towers measuring 12.5”-13.5” in height.
- EASY TO USE – BEERGON beer tower covering improves and maintains your brewery equipment by keeping it insulated and protected and features an EXTRA-WIDE Hook-&-Loop Strip (1.2” wide) making it more durable so you can take the cover on and off at will.
- OUR SELECTED “CHARCOAL” COLOR makes your tower look great and clean easily – Wipe it with a lightly damp cloth to remove any visible stains so you can enjoy your tower always looking awesome!
BEERGON Beer Tower Insulator is a cover made of EXTRA-THICK (4 mm) Neoprene material for best insulation of your beer tower. This allows you to keep your beer ice-cold from the first drop you pour. This cover is easy to use and features an EXTRA-WIDE Hook-&-Loop fastener (1.2-inch wide) which makes it more durable so you can take it on and off at will. It prevents condensation on your beer dispenser and importantly it is great for protecting your tower from splashing beer and from scratches. It fits single-tap beer towers of 3” in diameter and 12.5”-13.5” tall as it made of stretchable fabric. Its “charcoal” color is optimized to look great and clean easily – wipe it with a lightly damp cloth to remove any visible stains and enjoy your tower looking awesome! GET YOUR BEERGON BEER TOWER COVER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) cooler insulator for single-tap beer tower (beer tower NOT included)
SPECIFICATIONS:
Cover’s dimension (open, spread out): 12.5” (Height) x 11” (Width)
Fits beer tower of this dimension: 3” diameter, 12.5”-13.5” tall
Fabric material: 4 mm thick Neoprene
Hook-&-Loop dimension: 1.2” wide, 10” high
Color: Charcoal (dark grey)
Draft Tower Fan Kit
- This add on kit for kegerators will blow cold air up into your draft tower, reducing foaming and giving you a better pour
- Small fan box pulls cold air from refrigerator and pushes it through tube stuck into the tower
- 12 v power supply included
- Gets rid of warm spots in fridge by increasing air circulation
Beer Tower Cooler
- Works with any kegerator with a 3″ or larger diameter beer tower – home built or store bought.
- Works with commercial or homebrew beer kegs. Easy to install – just insert into your beer tower from inside your kegerator, zip-tie the hose to your beer line with the included zip-tie so it does not slip out, plug-in and you are ready to go.
- Built with an 8500 RPM 9.9 CFM blower motor, but only draws 1.6 Watts. 9.9 CFM is more than enough air to cool any beer tower ice cold!
- With our tower cooler, Our very tiny but powerful 40 mm fan hangs down inside your kegerator and blows just the right amount of cold air into your beer tower and onto your beer shanks.
- Completely pre-assembled – no assembly required. Includes a energy star energy efficient power supply.
Our beer kegerator tower cooler is designed to cool the beer tower on your home kegerator, a direct draw type draft beer system. With a direct draw system, the beer keg is stored in a refrigerator or cooler right below the beer tower. The number one complaint about any direct draw home kegerator is your first 1/2 glass of beer is always foamy. The reason for this is simple – the beer faucet & shank inside your beer tower get warm between glasses and cause your foamy beer. And the solution is less than 5 minutes away – just install our Beer Tower Cooler! Our tower cooler works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is the continuous cold keeps faucet mold and bacteria growth inside your beer faucet at an absolute minimum. Our tower cooler ships with everything pictured – completely assembled beer tower cooler, zip tie to tie your tower cooler to your beer lines and high quality 1 Amp 12VDC Energy Star power supply.Air flow is all about your fan rating and the hose diameter you are pushing air through. Our ¾” ID diameter hose flows more air to your beer tower than the competition’s “upgraded” ½” diameter hose no matter what they claim their fan’s CFM is, plus their ridged air hose offers even more air flow resistance.
Beer Tower Cooler with 5 Faucet Caps (Black)
- Works with any kegerator with a 3″ or larger diameter beer tower – home built or store bought.
- Works with commercial or homebrew beer kegs. Easy to install – just insert into your beer tower from inside your kegerator, zip-tie the hose to your beer line with the included zip-tie so it does not slip out, plug-in and you are ready to go.
- Built with an 8500 RPM 9.9 CFM blower motor, but only draws 1.6 Watts. 9.9 CFM is more than enough air to cool any beer tower ice cold! Completely pre-assembled – no assembly required. Includes a energy star energy efficient power supply.
- With our tower cooler, Our very tiny but powerful 40 mm fan hangs down inside your kegerator and blows just the right amount of cold air into your beer tower and onto your beer shanks.
- The 5 included, reusable beer faucet caps / tap soothers protect your beer faucets from fruit flies
Our beer kegerator tower cooler is designed to cool the beer tower on your home kegerator, a direct draw type draft beer system. With a direct draw system, the beer keg is stored in a refrigerator or cooler right below the beer tower. The number one complaint about any direct draw home kegerator is your first 1/2 glass of beer is always foamy. The reason for this is simple – the beer faucet & shank inside your beer tower get warm between glasses and cause your foamy beer. And the solution is less than 5 minutes away – just install our Beer Tower Cooler! Our tower cooler works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is the continuous cold keeps faucet mold and bacteria growth inside your beer faucet at an absolute minimum. Our tower cooler ships with everything pictured – completely assembled beer tower cooler, zip tie to tie your tower cooler to your beer lines and high quality 1 Amp 12VDC Energy Star power supply.Air flow is all about your fan rating and the hose diameter you are pushing air through. Our ¾” ID diameter hose flows more air to your beer tower than the competition’s “upgraded” ½” diameter hose no matter what they claim their fan’s CFM is, plus their ridged air hose offers even more air flow resistance. The 5 included, reusable beer faucet caps / tap soothers protect your beer faucets from fruit flies.
Kegerator Tower Cooler Custom Sleeve for Beer Tower – Neoprene – Perfect Fit for Kegerator Tap Tower – Easy to Use Beer Tower Cooler Accessory (2.5" Diameter x 11.5" Height Beer Tower)
- MAINTAINS ICY COLD BEER TOWERS – Don’t waste that first pour of precious draft beer. The Kegerator Tower Cooler Chiller minimizes foam and moderates draft beer tower temperature. Colder Kegorator towers mean MORE BEER AND LESS WASTE!
- PROTECT YOUR BEER KEG TOWER FROM CONDENSATION DAMAGE – Fight condensation through insulation! Stainless steel beer towers naturally sweat. Prevent temperature loss with this neoprene tower chiller sleeve. Protect your draft beer tap faucet investment.
- CUSTOMIZE YOU OWN PERFECT FIT – This DIY Kegerator accessory allows you to customize your own perfect fit around beer faucets. Variations are available for single, double, and triple tap towers. Sleeve dimensions are (2.5” Diameter x 11.5” Height) Compatible with all beer tower brands.
- EASY TO USE KEGERATOR ACCESSORY – Works in combination with standard Kegerator fan tap tower blowers and keg tower cooler fan. Sleeve has a durable design for easy cleaning. A perfect kegerator kit accessory for draft beer kit or keg tap kit.
- **STAINLESS STEEL BEER TAP TOWER NOT INCLUDED**
HIGH-FLOW Beer Tower Cooler
- HIGH-FLOW Beer Tower Cooler with 3X the air flow of our standard beer tower cooler. Works with any kegerator with a 3″ or larger diameter beer tower – home built or store bought.
- Completely pre-assembled – no assembly required. Includes a energy star energy efficient power supply.
- Works with commercial or homebrew beer kegs. Easy to install – just insert into your beer tower from inside your kegerator, zip-tie the hose to your beer line with the included zip-tie so it does not slip out, plug-in and you are ready to go.
- Built with a high speed 30 CFM blower motor, but only draws 1.6 Watts. 30 CFM is more than enough air to cool any beer tower ice cold!
- With our tower cooler, Our very tiny but powerful 50 mm fan hangs down inside your kegerator and blows just the right amount of cold air into your beer tower and onto your beer shanks
Our beer kegerator tower cooler is designed to cool the beer tower on your home kegerator, a direct draw type draft beer system. With a direct draw system, the beer keg is stored in a refrigerator or cooler right below the beer tower. The number one complaint about any direct draw home kegerator is your first 1/2 glass of beer is always foamy. The reason for this is simple – the beer faucet & shank inside your beer tower get warm between glasses and cause your foamy beer. And the solution is less than 5 minutes away – just install our Beer Tower Cooler! Our tower cooler works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is the continuous cold keeps faucet mold and bacteria growth inside your beer faucet at an absolute minimum. Our tower cooler ships with everything pictured – completely assembled beer tower cooler, zip tie to tie your tower cooler to your beer lines and high quality 1 Amp 12VDC Energy Star power supply.Air flow is all about your fan rating and the hose diameter you are pushing air through. Our ¾” ID diameter hose plus our 30 CFM rated fan motor flows more air to your beer tower than the competition’s “upgraded” ½” diameter hose no matter what they claim their fan’s CFM is, plus their ridged air hose offers even more air flow resistance.
Conclusion
By our suggestions above, we hope that you can found beer tower cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
