homeplusexpress 
Nowadays, there are so many products of ceramic heating element vape in the market and you are wondering to choose a best one. You have searched for ceramic heating element vape in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ceramic heating element vape which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
uxcell 1.4mm 15AWG Heating Resistor Wire Wrapping Nichrome Resistance for Heating Elements 16ft
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG15
- Wire Diameter: 1.4mm/0.055inch
- Length: 5m/16ft.
- Resistance: 0.7084Ohm/M
- Maximum Operating Temp : 1200C(2192F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Silver Tone.
- Good thermal efficiency, even heating, safe use and long service life.
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
uxcell a14092500ux0360 30M AWG24 0.5mm Nichrome Resistance Resistor Wire for Heating Elements
Kanthal A1 – 100′ – 24 Gauge Resistance Wire
Wire Specifications:
– Diameter: 24 Gauge / 0.51mm
– Shape: Round
– Alloy Kanthal A-1
– Length 100 ft.
– Heat Treatment Annealed (soft)
– Melting Temperature 1500°C / 2730°F
– Max Continuous Operating Temp: 1400°C / 2550°F
– Resistance: 2.04 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
TPI Corporation 178TMC Fan Forced Portable Heater – Ceramic Heating Element, High/Low Fan – UL Listed Fan Heater. Space Heaters
- Lightweight TPI Heater: fan forced portable heater. Electric heater ideal for small rooms and work areas. Can be used in classrooms, entry ways, workshops, garages, laundry rooms. Great heating device for area heating, spot heating or freeze protection. Passes air over heat element to expel heat from the enclosure for greater throw and circulation
- Portable Heating Element: temperature control thermostat. Quick and powerful heating action. Space heater with low noise functioning. High efficiency room heaters for extremely cold areas. Delivers warmth with double safety system: Automatic Reset Type Limit Control. Thoughtful gift for friends and family residing in colder places
- High Performance Fan Heater: features ceramic element for enhanced safety that is self-regulating. Electric heater with high/low fan settings for achieving desired comfort. 1500/ 850 W garage heater. 5120 BTU, 120V
- Innovative Design: compact design heating device. Easy DIY installation flexibility. Robust construction for long life expectancy. Made with high quality steel. UL listed heater. Includes thermostat for adjustable temperature control. Offers space saving convenience
- Care Tip: wait for the heater to cool after switching off. Clean the surface with dry cloth or feather duster. Remove loose dust and wipe with damp cloth. Low maintenance compartment heater
The robust heating element features ceramic element for enhanced safety with self-regulating feature. The easy to install fan heater is UL listed and comes with Automatic reset type limit control for double safety system. Low maintenance room heater delivers quick heating action in low traffic areas like workshops, garages, laundry rooms. Portable heater can be carried along while traveling, thanks to its lightweight feature. Steel construction for durability, heat retention, and longevity; this heater is designed to outlast the toughest environments.
Two heat settings: 1500W / 950W plus fan only setting (20W) with temperature control thermostat, 6’ long cord with ground. Width: 11 1 ⁄4” Height: 10” Depth: 7”. Features a double safety system: with automatic reset type limit control and thermal cut-off device. Imported specifically to TPI Corporation specifications. For over 65 years
TPI Corporation has been known as America’s Comfort Conditioning Company. Today – as a U.S. based privately held manufacturer – TPI Corporation continues to produce innovative, industry leading products for the electric heating, fan and ventilation, industrial lighting, commercial controls, and industrial oven markets. So, if you have a need in the industrial, commercial, or residential marketplace – TPI has a solution.
TEMCo Kanthal A1 wire 24 Gauge 100 Ft Resistance AWG A-1 ga
- 24 AWG, Average wire diameter: 0.0201 in. (0.51054 mm), 2.07 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
Kanthal A1 – 100′ – 22 Gauge Resistance Wire
Wire Specifications:
– Diameter: 22 Gauge / 0.64mm
– Shape: Round
– Alloy Kanthal A-1
– Length 100 ft.
– Heat Treatment Annealed (soft)
– Melting Temperature 1500°C / 2730°F
– Max Continuous Operating Temp: 1400°C / 2550°F
– Resistance: 1.31 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
uxcell 50M AWG29 0.3mm Nichrome Resistor Resistance Wire for Heating Elements
uxcell 21 Gauge Heat Resistance Wire Wrapping 66ft Heating Resistor Wires Electronic Coil
- FeCrAl heating alloy, high temperature resistant, corrosion resistant.
- Wire Diameter: 0.7mm/0.028inch
- Length: 20M/66ft
- Resistance: 3.7 Ohm/M.
- Material: FeCrAl
- Max. Operating Temp: 1200C.
- Good thermal efficiency, even heating, safe use and long service life.
- Main Color: Silver Tone
- Package Content: 1 x Heater Wire.
Description:
FeCrAl is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
Specification:
Product Name: Iron Chrome Aluminum Heating Wire
Material: FeCrAl
Main Color: Silver Tone
Wire Gauge: 21 AWG
Wire Length: 20 M/66ft
Max. Operating Temp: 1200C
Average Wire Diameter: 0.7mm/0.028inch
Size:47 x 56 mm/1.85 x 2.2 inch（D*H）
Package Content: 1 x Iron Chrome Aluminum Heating Wire
Similar items with 4 stars and above
Stainless Steel 316L – 100′ – 26 Gauge Wire
Wire Specifications:
– Diameter: 26 Gauge / 0.40mm
– Shape: Round
– Alloy: Stainless Steel 316L
– Length 100 ft.
– Heat Treatment: Annealed (soft)
– Melting Temperature: 2550°F / 1400°C
– Max Operating Temp: 1700°F / 925°C
– Resistance: 1.76 Ohms/ft at room temperature
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Stainless Steel 316L wire are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
TEMCo Flat Ribbon Kanthal A1 Wire 0.8mm x 0.1mm 100 Ft Resistance A-1
- 0.8 x 0.1 mm (0.0315 x 0.004 in), Approx round wire equivalent: 28 AWG, 5.76 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found ceramic heating element vape for you.Please don’t forget to share your experience by comment in this post. Thank you!
