homeplusexpress 
Nowadays, there are so many products of cold water kit for refrigerator ice maker in the market and you are wondering to choose a best one. You have searched for cold water kit for refrigerator ice maker in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cold water kit for refrigerator ice maker which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Whirlpool IceMaker Kit ECKMFEZ2 EZ Connect
Add an ice maker to selected models with ease. It takes less than 5 minutes to install the EZ Connect ice maker inside selected refrigerators.
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked high density polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily without the hassle of shutting off the water. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water where you want it to go.
- LEAD FREE COPPER CONSTRUCTION allows you to safely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper saddle valve is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. For use with 3/8” to 3/4″ copper pipe. 1/4 inch outer diameter outlet saddle valve. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Limited lifetime warranty. Choice Hose and Tubing part number 509 5110K.
Get your appliances set up quickly and easily with this ice maker, humidifier, water filter and evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation. Limited lifetime warranty. Make it yours today!
iSpring ICEK Ultra Safe Fridge Water Line Connection and Ice Maker Installation Kit for Reverse Osmosis Systems & Water Filters
- Connects any water filtration system (including reverse osmosis systems) to the ice maker or water dispenser of your fridge
- Delivers crystal clear ice cubes and great tasting RO water to your fridge, superior to inline fridge filters
- Kit includes everything you need for the installation – 20 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, and a compression fitting set. Tested by independent third-party to meet NSF/ANSI Standards
- Durable and easy to install – Push-in quick connect fittings offer easy DIY installation with no tools required
- Push-in quick connect fittings offer easy DIY installation with no tools required
The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.
Whirlpool 1129316 Whirlpool Refrigerator Ice Maker Kit for Whirlpool, KitchenAid, Roper, and Inglis
Product Description
This is a genuine replacement part.
From the Manufacturer
Replacement or add-on ice maker kit assembly for refrigerators and some full sized upright freezers. Check your Use & Care guide to see if your refrigerator accommodates and ice maker kit.
WECO Universal Ice Maker/Humidifier Installation Kit
- 1/4-Inch X 25′ NSF Certified Food Grade Poly tubing.
- EZ RO Adaper adds a filtration outlet to any supply stop. Adapter can be used to connect municipal and well water supplies directly to the ice maker.
- Teflon Tape, 1/4″ Union Tee, 1/4″ Inline Ball Valve included.
- Connect water filtration systems (reverse osmosis (RO), multimedia and other systems) to refridgerator ice makers for crystal clear water/ice cubes.
WECO IM25EZ Universal Ice Maker/Humidifier Installation Kit connects your municial/well water supply or water filtation outlet to the refridgerator ice maker or humidifier.
APEC Water Systems ICEMAKER-KIT-RO-1-4 Ice Maker Kit for Reverse Osmosis Systems, Refrigerator & Water Filters
- Connects APEC RO systems to refrigerator ice makers for ultrapure water superior to fridge filters
- Enjoy clear, sparkling & delicious ice cubes and RO water at your fridge dispenser
- Includes 20’ of 1/4 in tubing 1 quick-connect T fitting & 1 quick-connect shut-off ball valve
- Works with most reverse osmosis and water filter systems using 1/4” standard tubing
- John Guest (JG) fittings & tubing for quick & easy installation by hand with no tools needed
This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. You will never have to spend money on small, ineffective and expensive refrigerator filters ever again.
This icemaker kit includes everything you will need to quickly and easily connect your refrigerator and reverse osmosis system. It includes one JG quick-connect “Tee” fitting, one JG quick-connect shut off ball valve and 20 feet of JG ¼” food-grade poly tubing. The “Tee” fitting diverts the RO purified water between the fridge and RO faucet giving access to both outlets. The ball valve can be used to shut off water flow to the fridge.
Kit includes
(1) * JG ¼” Tee quick-connect fittings
(1) * JG ¼” Shut off valve
(1) * JG ¼” Tubing (20 ft)
Works for all APEC ROES-50, ROES-PH75, ROES-UV75, RO-45, RO-90, RO-PERM and RO-PUMP systems, and most standard under-counter reverse osmosis systems using ¼” tubing and connectors.
For over 20 years, APEC has been an industry leading manufacturer of high performance RO systems.
APEC Water does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water products from Amazon or APEC Water directly for authenticity.
4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool Kenmore Kitchen Aid Maytag Jenn Air Replace # W10757851 AP5956767 W10193666 ADC9102 2198586 PS557945 AP3137510
- ✅【Ideal Replacement】: Want a new Ice Maker Emitter Sensor Control Board that matches the original, for far less than going back to the dealership? This refrigerator control board was specifically designed to look and function the same as the original Emitter Sensor Control Board on your Whirlpool Ice Maker. While this is NOT a genuine Whirlpool part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅【REPLACEMENT ICE MAKER OPTIC BOARD】 – The ice maker is controlled by this ‘Optics Board Kit’ that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). If the ice level control board fails, the ice maker will stop making ice.
- ✅【Compatible】: Refrigerator ice maker ice level optics control board kit. Includes emitter and receiver control boards.Designed to fit specific Whirlpool manufactured refrigerator models including Jenn Air Kenmore Kitchen Aid Maytag. You can send us refrigerator models number, we can help you to confirm if it can work or not.
- ✅【Replaces Part Numbers】: ADC9102 AP3137510 PS557945 PS10064583 2220398 2220402 W10193666 W10193840 2198585 2198586 2198588 2255114 W10290817 4388635 4389102 4389102R W10757851 AP595676 PS10064583 TJ4389102R.
- ✅【Buy with Confidence】: Order from KONDUONE, we offer LIFETIME WARRANTY, true worry-free shopping experience. If the Icemaker ever fails on your Whirlpool Refrigerator simply contact us for a replacement and save dealer prices.
Super Exquisite and Durable Icemaker Control Board Kit
How To Test The Whirlpool Ice Maker Optic Control Boards 4389102
Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause. blink blink… pause).
Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.
Diagnostics 3 : If there is no status LED light, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.
How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102
Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.
Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.
Step3: Next, remove the three Phillips screws on the left hand side.
Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.
Specification:
Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual
Certified Appliance IM300SS Ice Maker Connectors, 25-Foot
Product Description
Certified Appliance IM300SS Ice Maker Connector (25 Feet Long), Braided Stainless Steel, 1/4 inch Comp X 1/4 inch Comp
From the Manufacturer
Ice Maker Connectors (25-Foot)
Kitchen Basics 101 WR30X10093 Refrigerator Ice Maker Kit Replacement for GE
- Replaces: WR29X5162, 1399596, AH1993870, EA1993870, PS1993870, SWR29X5110, SWR29X5114, SWR29X5115, SWR29X5119, SWR29X5121, SWR29X5128, WR29X0191, WR29X5007, WR29X5012, WR29X5023, WR30M0149, WR30M0153, WR30X0138, WR30X0147, WR30X0148, WR30X0159, WR30X0169, WR30X0199, WR30X0203, WR30X0213, WR30X0214, WR30X0238, WR30X0241, WR30X0259, WR30X0282, WR30X0283, WR30X0289, WR30X0290, WR30X0304, WR30X0306, WR30X0307, WR30X0310, WR30X0315, WR30X0318, WR30X214
- Compatible with: GE, Hotpoint, RCA and others
- Includes: Power cords, End-Mounted Fill Cups
- Superior Quality you can Trust! All SupplyEdge Products are UL/CSA approved to assure safe operation and long life.
- Warranty- All parts sold by SupplyEdge come with a 1 year, no questions asked, no hassle warranty.
This is a Kitchen Basics 101 WR30X10093 Refrigerator Ice Maker Kit Replacement for GE.
Specifications:
Replaces: WR29X5162, 1399596, AH1993870, EA1993870, PS1993870, SWR29X5110, SWR29X5114, SWR29X5115, SWR29X5119, SWR29X5121, SWR29X5128, WR29X0191, WR29X5007, WR29X5012, WR29X5023, WR30M0149, WR30M0153, WR30X0138, WR30X0147, WR30X0148, WR30X0159, WR30X0169, WR30X0199, WR30X0203, WR30X0213, WR30X0214, WR30X0238, WR30X0241, WR30X0259, WR30X0282, WR30X0283, WR30X0289, WR30X0290, WR30X0304, WR30X0306, WR30X0307, WR30X0310, WR30X0315
Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Ge Im4d Icemaker
- For use in most top-freezer refrigerators and some bottom-freezer refrigerators, please check the label on the back of your refrigerator to ensure compatibility.
- Quickly install a new or replacement IM4D icemaker unit with an all-inclusive kit.
- Includes ice bucket, fill tube, water valve, installation materials and hardware.
- Dimensions: 9.5″ w x 9.5″ h x 14.5″ d.
Approximate Shipping Weight 6.0 lb Net Weight 5.0 lb
Conclusion
By our suggestions above, we hope that you can found cold water kit for refrigerator ice maker for you.Please don’t forget to share your experience by comment in this post. Thank you!
