Top 10 Dewalt 18V Circular Saw Magnesium Deck

Product description

The DeWalt DC390 is a 18V cordless circular saw (and is the tool only). The saw uses 6-1/2 inch carbide tipped blade for 2x cutting capacity at 90 and 45 degrees. It has high strength magnesium shoe and upper guard provides increased durability. 0-50 degree bevel capacity provides additional capacity for a multitude of applications. It features fan-cooled motor with replaceable brushes for maximum power and durability.

Amazon.com

Whether building wood decks or dormers, bookcases or kitchen cabinets, the professional-duty DEWALT DC390B 18-volt, 6-1/2-inch cordless circular saw delivers cordless convenience without sacrificing power or performance. An 18-volt battery (not included) drives the saw’s 6-1/2-inch, thin-kerf blade at 3,700 RPM, an optimum speed for crosscutting and ripping construction lumber, softwood, hardwood, plywood, particleboard, oriented-strand board, and virtually any other sheet.

3,700 RPM for fast rip cuts and cross cuts
(view larger).

Power and Performance

With depth-of-cut capacities of 2-1/4-inch at 90-degrees and 1-5/8-inch at 45-degree (bevel), the DC390B can slice through all 2-by dimensional lumber. The 6-1/2-inch carbide tipped blade gives you 2x cutting capacity at 90 and 45 degrees, and the 0-50-dgree bevel capacity provides additional capacity for a multitude of applications.

A high strength magnesium shoe and upper guard provides increased durability, while a fan-cooled motor with replaceable brushes provides maximum power and durability. It’s complemented by a vibration-dampening rubber-grip handle for comfortable handling on big jobs. This circular saw weighs 6.3 pounds.

Bare Tool

This DEWALT cordless tool does not come with a battery or charger. It’s compatible with the DC9096 18-volt XRP battery pack and DW9117 15-minute charger.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It’s also covered by DEWALT’s one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use–for free.

What’s in the Box

One DEWALT DC390B 18-volt 6-1/2-inch cordless circular saw, one carbide tipped blade, one blade wrench, and operating instructions (batteries and charger sold separately).

See all Product description

The DEWALT DCS391B 20V MAX 6-1/2″ Circular Saw features a powerful 460 MWO, 5250 RPM motor that delivers power and speed to make the most demanding cuts with ease. A high strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy, and an optimized rubber overmolded comfort grip delivers optimal balance and control. The 0Degree-50Degree bevel capacity allows for aggressive bevel cuts for a multitude of applications, along with the 6-1/2″ carbide tipped blade for cutting 2x material at 90Degree and 45Degree and more cuts per charge. No load speed: 5250 rpm, Arbor size: 5/8″, Depth of cut at 45Degree: 1-5/8″, Depth of cut at 90Degree: 2-1/4″. Includes: DCS391 6-1/2″ Circular Saw, 6-1/2″ Carbide-tipped Blade. This is a bare tool item (battery sold separately).

Product description

458-5008MGA This item features: -Large cutting capacity and bevel capacity (0 50 ) with positive stops at 22.5and 45 . -Two built-in L.E.D. lights illuminate the line of cut for increased accuracy. -Electric brake for maximum productivity. -Built-in dust blower enhances the line of cut. -Better fit and more control with comfortable rubber grip on handle. -Blade Diam: 8 1/4 in. -Arbor Diam: 5/8 in. -Voltage: 120.00 V. -Amps: 15.00 A. -Watts: 2300.00 W. -Speed: 5200 rpm. -Cutting Cap. 2: 3 in. @ 90 , 2-1/4 in. @ 45 . -Length: 13 1/8 in. -Includes: Carbide Tipped Blade, Blade Wrench, Rip Fence. -Price is for 1 Each.

Amazon.com

The Makita 8-1/4-Inch Magnesium Circular Saw with Electric Brake features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor, powerful enough to cut through the densest lumber. The 5008MGA balances weight, power, durability, and ease of use with a 3-inch maximum cutting capacity, making it perfect for framers, roofers, as well as general contractors who require a best-in-class engineered circular saw.

View larger

5008MGA Features DURABILITY – Magnesium components create a saw with less weight (10.6 lbs.) — that’s jobsite tough! POWER – 15 AMP motor delivers enough power to cut through the densest lumber EFFICIENCY – Quick change from 0° to 45° and back using positive stops PERFORMANCE – Electric brake for maximum productivity INCLUDES – Carbide tipped blade, rip fence and wrench

Tool Specifications Blade Diameter 8-1/4″ Arbor 5/8″ Max. Cutting Capacity at 90° 3″ Max. Cutting Capacity at 45° 2-1/4″ No Load Speed 5,200 RPM Watts Out 2,300 AMPS (120V) 15.0 Length 13-1/8″ Net Weight 10.6 lbs.

Makita-Built Motor Engineered for Versatile Power
The 5008MGA features a Makita-built 15 AMP industrial motor that delivers 5,200 RPM, combined with well-balanced magnesium components for a lighter weight saw that delivers true power the professional user demands. The saw has a large cutting capacity (3 inches at 90°) with a maximum bevel capacity of 50° and positive stops at 22.5° and 45° for quick back-and-forth changes. The 5008MGA includes an electric brake to stop the blade quickly for maximum productivity, as well as a premium carbide-tipped blade and a blade wrench attached to the saw for fast and convenient blade changing.

Ergonomic and Ease-of-Use
Features Magnesium components allowed Makita to engineer a saw with less weight (10.6 pounds) that is well-balanced and jobsite tough. Additional design details include greater clearance between the rear handle and the blade case to provide a better grip for larger hands or for users with gloves, as well as a wider space between the blade and housing for a clearer view of the blade and measurement scale. The saw features twin L.E.D. lights for better illumination, as well as ducting designed to blow dust away from the line of cut. Makita also engineered ergonomics and ease-of-use into the saw, including clearly visible depth and bevel markings and ergonomic hand grips to improve overall control while minimizing operator fatigue. The large rubberized levers provide quick, one-handed adjustments for more efficient work.

Engineered for a Range of Applications
The 5008MGA 8-1/4-Inch Circular Saw is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, Parallam and I-Joists, headers and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels like Advantech. Other applications include plunge cutting, pocket cutting, bevel cutting, masonry and metal cutting. The 5008MGA is just another example of Makita’s commitment to innovative technology and best-in-class engineering.

About Makita’s Magnesium Series
Magnesium components are stronger and lighter than conventional materials, resulting in saws that weigh less with improved ergonomic features. There’s plenty of power thanks to Makita engineering, and a precision balanced design that delivers clean, accurate cuts.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What’s in the Box
Makita 5008MGA 8-1/4-Inch Magnesium Circular Saw, 24T carbide-tipped framing blade, rip fence and hex blade wrench.

See all Product description

Product Description

Powerful 15.0 amp motor delivers 5,800 rpm for proven performance and jobsite durability. Magnesium components create a lightweight saw (10.6 lbs) that is well balanced and jobsite tough. Make quick, one-handed adjustments using large, rubberized levers. Better fit and more control with comfortable rubber grip handle. Settings are easy to read with oversized number and ruler markings. Large cutting capacity (2-1/2" at 90 degrees) and bevel capacity (0-56 degrees) with positive stops at 22.5 and 45 degrees. Two built-in L.E.D. lights illuminate the line of cut for increased accuracy. Built-in dust blower clears the line of cut for greater accuracy. Blade wrench is attached to saw for fast and convenient blade changing. Reinforced power cord withstands jobsite abuse and lower repair costs. Includes a premium 7-1/4" carbide tipped framing blade that cuts faster and lasts longer.

Amazon.com

The Makita 7-1/4-Inch Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market.

View larger

5007MG Features DURABILITY – Magnesium components create a saw with less weight (10.1 lbs.) — that’s jobsite tough! POWER – 15 AMP motor delivers enough power to cut through the densest lumber EFFICIENCY – Large cutting capacity (2-1/2 in. at 90°) with positive stops at 22.5°, 45° and 56° ACCURACY – Built-in L.E.D. light and dust blower enhances the line of cut INCLUDES – Carbide Tipped blade, rip fence, wrench and tool case

Tool Specifications Blade Diameter 7-1/4″ Arbor 5/8″ Max. Cutting Capacity at 90° 2-1/2″ Max. Cutting Capacity at 45° 1-3/4″ No Load Speed 5,800 RPM Watts out 2,300 AMPS (120V) 15.0 Length 12-1/2″ Net Weight (lbs.) 10.1

Makita-Built Motor Engineered for Versatile Power
The 5007MG features a Makita-built 15 AMP industrial motor that delivers 5,800 RPM, combined with well-balanced magnesium components for a lighter weight saw that delivers true power the professional user demands. The saw has a large cutting capacity (2-1/2 inches at 90°) with a maximum bevel capacity of 56° and positive stops at 22.5° and 45° for quick back-and-forth changes.

Ergonomic and Ease-of-Use
Features Magnesium components allowed Makita to engineer a saw with less weight (10.1 pounds) that is well-balanced and jobsite tough. Additional design details include greater clearance between the rear handle and the blade case to provide a better grip for larger hands or for users with gloves, as well as a wider space between the blade and housing for a clearer view of the blade and measurement scale. The saw features twin L.E.D. lights for better illumination, as well as ducting designed to blow dust away from the line of cut. Makita also engineered ergonomics and ease-of-use into the saw, including clearly visible depth and bevel markings and ergonomic hand grips to improve overall control while minimizing operator fatigue. The large rubberized levers provide quick, one-handed adjustments for more efficient work.

Includes Ultra-Coated Framing Blade
The 5007MG includes a Makita 7-1/4-Inch Premium Ultra-Coated Framing Blade with Advance Tooth Design. The “M” shaped tooth design features a two-pointed tip and two 10° bevel faces to maximize cutting performance for a faster, cleaner and longer lasting cut. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is also ultra-coated to reduce heat and pitch build-up for faster, smoother cutting, with special Makita heat vents strategically set to dissipate heat and increase performance. The 5007MG also include a blade wrench attached to the saw for fast and convenient blade changing.

Engineered for a Range of Applications
The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting, as well as masonry and metal cutting. The 5007MG is just another example of Makita’s commitment to innovative technology and best-in-class engineering.

About Makita’s Magnesium Series
Magnesium components are stronger and lighter than conventional materials, resulting in saws that weigh less with improved ergonomic features. There’s plenty of power thanks to Makita engineering, and a precision balanced design that delivers clean, accurate cuts.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What’s in the Box
Makita 5007MG 7-1/4-Inch Magnesium Circular Saw, 24T carbide-tipped framing blade, hex blade wrench, rip fence, and tool case.

The Makita 18V LXT Lithium-Ion cordless 6-1/2″ Circular saw delivers cordless cutting power to the job site. The XSS02Z (Tool only) has a Makita-built high-torque motor and a compact design for a range of cutting applications, and will cut 2x material at 45 degrees. The Makita-built high torque motor produces 3, 700 RPM for faster cutting. The heavy gauge, precision machined base is engineered for smooth, accurate cutting and added durability in harsh job site conditions.

For greater speed and faster cuts, turn to this powerful Skil 14-amp corded Circular saw for heavy-duty tasks. The motor delivers 5,300-rpm, while the 51° bevel capacity with a positive stop at 45° allows for a wide range of angled cuts with a carbide-tipped blade. Zip through straight lines with the two-point line of sight, while an improved dust blower increases your visibility while cutting. Anti-snag lower guard provides smooth operation for narrower Cut-Off, and the lightweight design means you can work longer with reduced fatigue. A spindle lock and on-board wrench storage allow you to change blades seamlessly between tasks with less downtime. For peace of mind on the jobsite, the safety lock/guarded trigger and Power-On indicator are designed to prevent accidental starts.

Product Description

Powerful 15 amp motor delivers 5, 800 RPM for proven performance and jobsite durability. Lower guard design improves performance when making bevel and narrow cuts. Large cutting capacity (2-3/8″ At 90 degrees, 1/-3/4″ At 45 degrees). two built-in L.E.D. Heavy gauge aluminum wrap-around base for improved durability. Two lights illuminate the line of cut for increased accuracy. Well balanced design for superior handling and performance. Ac/DC switch allows for use with alternative power sources. Bevel cuts 0-45 degrees for the most common angles. Large easy to read markings on depth and bevel scales. Flat motor housing design increases stability when changing blades. Conveniently located shaft Lock for easy blade replacement. All ball bearing construction for longer life. Ideal for framers, builders, masons and siding contractors.

From the Manufacturer

Makita listened to the pro-user and engineered the 5007F 7-1/4-Inch Circular Saw with user-friendly features combined with power, weight, balance, and job-site durability. Makita-built motor engineered for versatile power

Makita engineered the 7-1/4" Circular Saw (model HS7600) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, less weight, and job site durability. The HS7600 is a more compact saw that is ideal for a range of framing and cutting applications. The HS7600 has a powerful 10.5 AMP motor and weighs only 8.6 lbs. for a high power-to-weight ratio. It has a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The large cutting capacity (2-1/2" at 90Degree, 1-5/84" at 45Degree) with a maximum bevel capacity of 0Degree-45Degree is ideal for most common angles. Ease of use features include easy-to-read markings on the depth and bevel scales, on-board blade wrench, and a flat motor housing design for stability when changing the blade. The lower guard design improves performance when making bevel and narrow cuts. The HR7600 includes a Makita 7-1/4" 24T Framing Blade delivers faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The HR7600 is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4" circular saw with less weight and superior balance.

For almost every job, you’ll need a reliable circular saw if you’re working with wood. The Ryobi P506 is a powerful piece of machinery that combines portability, accuracy, and power. It can rip through most woods at 4,600 revolutions per minute. First, it has a rubberized overgrip that lets you hold this in most weather conditions. The blade is located on the left side to improve that control, along with an extra handle that lets you guide this smoothly. Most helpful is the laser guide that projects a red beam in front of the tool that shows you where you’re about to go. This piece is fully adjustable, too, letting you adjust your bevel from 0 to 50 degrees and your depth up to 1 9/16 inches. On top of that, it’s a part of the One+ collection, so there is a huge collection of batteries in all kinds of price ranges that will work with this. Few pieces compare to the attention to detail Ryobi’s put into this product. Everything fits together to bring you an accurate and powerful sawing experience. Ryobi does DIY right.

Makita, a pioneer in Brushless motor technology and battery innovation, combines both in the 18V X2 LXT® (36V) Lithium-Ion Brushless 7-1/4” Circular saw (XSH06Z, tool only, batteries and charger sold separately). it’s powered by two 18V LXT® Lithium-Ion batteries for maximum performance, and has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like cutting sheet and dimensional lumber that traditionally called for a corded saw. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries with the XSH06Z as they use across the expansive Makita 18V LXT® cordless tool system. The XSH06Z has a long list of features for efficient cutting without the cord. The electronically-controlled Brushless motor delivers a full 6, 000 RPM for efficient cutting, with automatic speed Change™ technology to adjust the cutting speed and torque under load for optimum performance. In internal testing, the XSH06Z made up to 600 cross-cuts per charge in 2×4 SPF lumber using two fully-charged 5.0Ah batteries. Added features include a large 2-11/16” cutting capacity at 90 degrees, and an Electric brake for maximum productivity. The saw has a die-cast magnesium base and blade guard with die-cast aluminum blade cover and motor housing, which combines durability with less weight (only 10.4 lbs. With batteries, sold separately). added features include a built-in dust blower to clean the line-of-cut, and a built-in tether notch (tether sold separately). it’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls™. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt 18V Circular Saw Magnesium Deck, eg:

• What are Top 10 Dewalt 18V Circular Saw Magnesium Deck for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt 18V Circular Saw Magnesium Deck to buy?
• What are Top Rated Dewalt 18V Circular Saw Magnesium Deck to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt 18V Circular Saw Magnesium Deck?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt 18V Circular Saw Magnesium Deck.
• Before deciding to buy any Dewalt 18V Circular Saw Magnesium Deck, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt 18V Circular Saw Magnesium Deck and What you should consider when buying the Dewalt 18V Circular Saw Magnesium Deck and Where to Buy or Purchase the Dewalt 18V Circular Saw Magnesium Deck. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt 18V Circular Saw Magnesium Deck of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt 18V Circular Saw Magnesium Deck.