The Best Dewalt 4 14 Angle Grinder

The DEWALT DWE402 4-1/2″ 11-amp Paddle Switch Angle Grinder features the next generation 11 Amp AC/DC 11,000 rpm motor, which provides the best power to weight/size ratio available (1.8HP). It’s Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool. The oversized brushes provide 2X brush life over previous model (D28402) and the large spiral bevel gear provides long transmission life. This grinder offers a One-Touch guard that allows for 360 degree rotation of the guard with a single action. The Quick-Change wheel release allows tool free wheel removal without need for a wrench. It has a top mounted and protected spindle lock button that maximizes the depth of cut without compromising durability. The uniquely small gripping surface in this power class allows for the best comfort available in this class. It also offers a newly designed side handle which provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage and a paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Includes: (1) 2-position side handle, (1) 4-1/2″ One-Touch (T27) Guard.

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

The DEWALT DWE43116 4-1/2″- 5″ high performance trigger switch Grinder shuts the Grinder off in less than a tenth of a second when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. The dust Ejection system™ technology provides durability by ejecting damaging dust and debris that enter through the air intake vents for extra protection. This unit also comes with 3 different type 27 guards. Specs: 13 amp motor, 9,000 RPM rating, trigger switch, 1700 max watts out, 2.3 HP, tool-free flange system, overload protection, tool weight = 5.7 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) side handle, inner and outer flange, 1) 4.5″ type 27 guard, 1) 5″ type 27 guard, 1) 6″ type 27 guard.

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

The DEWALT DW840K 7-Inch Angle Grinder with Bag and Wheels. This grinder features a 13.0 Amp AC/DC, 8,000 rpm motor which provides high power and speed for 7″ grinding applications. It has a high power-to-weight ratio for greater efficiency and reduced user fatigue. The adjustable guard can be adjusted to redirect sparks away from user. Rear handle design for greater comfort and control, and external brush caps for easy servicing. The sealed ball and roller bearings allow for extended motor life. A spindle lock button allows for single-wrench bit changes. Includes (5) Grinding Wheels, Wrench, Backing Flange, Adjustable Guard, 2-Position Side Handle, Carrying bag.

DEWALT DWE4599N 9″ 6,500 rpm 4.9 HP Angle Grinder, No-Lk; DEWALT’s Perform & Protect line of Power Tools is designed to provide a high level of one of more of the following: control, dust containment, or low vibration, without sacrificing performance. This unit has a high power 4.9 HP (maximum motor HP) 6,500 rpm motor provides overload protection giving higher operating speeds under load. It features a E-Clutch System shuts the tool off when a wheel pinch is detected, reducing kick-back, (a Perform & Protect Control Feature). The anti-vibration side handle reduces the users exposure to vibration, (a Perform & Protect Vibration Feature), and the Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the “on” position, (a Perform & Protect Control Feature). A Power-Off Advanced Electronic Overload Protection shuts the tool off before it reaches overload or burn-up. Also featuring a Dust Ejection System that increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor. A low profile gear case allows for work in tight areas, and the automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. It has a 3-position side handle which provides improved ergonomics for specific applications. The 6,500 rpm provides optimal material removal with 9″ grinding wheels. There is also a brush door allows for quick brush replacement, and the light weight design (12.8 lbs) lessens user fatigue. The Quick Change Guard allows user to quickly adjust guard to redirect sparks. A soft grip trigger handle provides greater comfort and control, and an anti-vibe trigger handle reduces user fatigue caused by vibration. Includes a 9″ guard and a 3-position anti-vibe side handle.

Product Description

5 pack, 4.5″ x 0.045″, metal & stainless cutting wheel, 7/8″ arbor, thin .045″ wheel design for fast burr free cutting, proprietary aluminum oxide grain combination for aggressive cutting action, proprietary material mix ensures durable long life wheels, 2 full sheets of fiberglass for durability & safety, fast burr free cutting.

From the Manufacturer

DEWALT High Performance .045-Inch Metal Cutting Wheels have a thin .045-Inch cutting edge design for fast burr free cutting. They have a proprietary aluminum oxide grain combination for aggressive cutting action and the proprietary material mix ensures durable long life wheels. They have 2 full sheets of fiberglass for durability and user safety. These wheels are ideal for high performance cutting in all types of ferrous metals and stainless steel.

Product Description

DEWALT DW4523 4-1/2-Inch by 1/4-Inch by 5/8-Inch General Purpose Metal Grinding Wheel

From the Manufacturer

DEWALT DW4523 4-1/2-Inch X 1/4-Inch X 5/8-Inch General Purpose Metal Grinding Wheel

Product Description

The product is 4-1/2″ HiPerf MAS Blade. Easy to use. The product is manufactured in China.

Amazon.com

DeWalt’s 4-1/2-Inch High Performance Masonry Diamond Blade provides long life and enhanced material removal. It has a thinner kerf to increase speed of cut while minimizing dust, and achieves 30 times longer life than bonded abrasives. This blade is best for cutting block, masonry siding products, and other masonry materials. It offers a faster cut rate at a constant depth, which is ideal for thinner and softer masonry materials.

See all Product description

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt 4 14 Angle Grinder, eg:

• What are Top 10 Dewalt 4 14 Angle Grinder for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt 4 14 Angle Grinder to buy?
• What are Top Rated Dewalt 4 14 Angle Grinder to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt 4 14 Angle Grinder?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt 4 14 Angle Grinder.
• Before deciding to buy any Dewalt 4 14 Angle Grinder, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt 4 14 Angle Grinder and What you should consider when buying the Dewalt 4 14 Angle Grinder and Where to Buy or Purchase the Dewalt 4 14 Angle Grinder. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt 4 14 Angle Grinder of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt 4 14 Angle Grinder.