homeplusexpress 
Nowadays, there are so many products of heating cartridge 6.3mm in the market and you are wondering to choose a best one. You have searched for heating cartridge 6.3mm in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating cartridge 6.3mm which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
WINSINN 3D Printer Sensor Heater Block, Compatible with E3D V6 J-Head RepRap Bowden Hotend Extruder for HT-NTC100K PT100 – Aluminum (Pack of 5Pcs)
►This heater block works with our New Standard thermistor sensor for V6… Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your V6 HotEnd, or a Type-K Thermistor cartridge, instead of a thermistor.
►These heater blocks are extremely similar to the standard V6 heater block, but instead of a hole sized for a thermistor with a clamping washer these blocks have a hole sized for the PT100 sensor, and use an M3 grub screw to quickly and easily secure or release the sensor.
——————————————————————————————————————–
►For V6
►Compatible HT-NTC100K PT100 sensor
►Suitable nozzle: M6 Screw thread
►Material: Aluminum alloy
►Size: 23*16*12mm
———————————————————————————————————————
Package include:
►5 x V6 Sensor Heater Block
►1 x Allen wrench
;———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
Zamtac 2pcs12V 40W Heater Cartridge for Wanhao Duplicator 3 Series 3D Printer Parts – Heating Cartridge V2
Wanhao Heating Cartridge for Duplicator i3. This is the new version of heating tube to Duplicator i3.
Diameter: 6.3 mm. Length: 26,59 mm. 12 volt 40 Watt
âWe are looking forward to a further extension of pleasant business relation. If you have any quetion or need something, pls contact us,we will do our best to make you satisfied.
to worldwide , send by China Post Airmail.
Delivery time about 20-30 business days. Some country may delay 1-2 weeks.
Attention:
If you wanna get the product urgently, we also can send it by EMS or UPS,DHL etc. You need to pay some freight more . Do contact us first if you want to change to EMS,UPS,DHL etc.
If you are not satisfied with yours purchase,for any reason,let us know.We will promptly replace the item or give you a re
Item specifics:
Item type: Cartridge Heater
Model number: Duplicator 3 Series
Name: Wanhao
Version: Duplicator 3 Series
Power: 12V 40W
Signstek 10 PCS Reprap 12V 40W 620 Ceramic Cartridge Heater for 3D Printer Prusa Mendel
BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 12V 50W Ceramic Cartridge Heater
BorgWarner 13009097005 Cartridge (S300SX-E SX-E 63mm (87/76))
Twin hydrodynamic journal bearings – Extended tip technology compressor wheel – Twin scroll turbine housing – Adjustable compressor and turbine housing orientation – Compressor cover recirculation grooves, PROPER .66A/R, allowing maximum airflow, unlike aftermarket ‘modified’ units using .63A/R housing, which can restrict airflow by 5% or more. NOTE: Compressor housing is all new for 2013, with radius-machined noise attenuator and revised recirculation groove design for peak efficiency and flow.
STHfficial 63mm Cap 220v 2000w Electric Water Heating Tube Stainless Steel Electric Heater Element for Water Boiler
- ▶Easy to install and use. Fast heating in time.
- ▶Give you convenience when you need hot water.
- ▶Reasonable structure, attractive appearance, stable performance.
- ▶Made of 304 stainless steel, the heating pipe owns the advantage of anti rusting and durability.
- ▶Suitable for something needing electric heating tube/pipe such as solar, water tank, boiler, air energy, water heater and so on.
Material:stainless
Power:2000w
Voltage:220v
Pipe diameter:8mm/0.31”
Cap size:63mm/2.48”
Main application:liquid heating
Package:
1x Heater Element
STHfficial 63mm Cap 220v 3000w Electric Spiral Heating Element Tube Spiral Distilling Machine Heating Tube Steam Cleaner Parts
- ▶Easy to install and use. Fast heating in time.
- ▶Give you convenience when you need hot water.
- ▶Reasonable structure, attractive appearance, stable performance.
- ▶Made of 304 stainless steel, the heating pipe owns the advantage of anti rusting and durability.
- ▶Suitable for something needing electric heating tube/pipe such as solar, water tank, boiler, air energy, water heater and so on.
Material:stainless
Power:3000w
Voltage:220v
Pipe diameter:8mm
Cap size:63mm
Main application:liquid heating\Distillation heating
Package: 1x Heater Element
Conclusion
By our suggestions above, we hope that you can found heating cartridge 6.3mm for you.Please don’t forget to share your experience by comment in this post. Thank you!
