homeplusexpress 
Nowadays, there are so many products of ninja blade replacement for bl487a in the market and you are wondering to choose a best one. You have searched for ninja blade replacement for bl487a in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja blade replacement for bl487a which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
49,019 Reviews Scanned
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013
- 【Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover
- The outer is made of durable PP material, Not easy to break and scrape.
- 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【Packing Includ 】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
- 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- ✅【ATTENTION】Ninja Replacement Blade — Compatible with BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012. **Please confirm your blender need 7 fins replacement blade before purchasing.
- ✅【 PREMIUM QUALITY】7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel. Packing include: 1x 7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber,one on the blade,the other is Spare Rubber(**Should you have any question about this item, feel free to contact us! )
- ✅【EASY TO INSTALL】 Just replace your bad blade and juicer can be reused. **The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.
- ✅【Note 1】 Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket【Note 2】Be careful of the blade when open the package. Any questions about the item, pls feel free to contact us. Dishwasher safe.
- ✅【MONEY-BACK GUARANTEE】:It’s non-original aftermarket part but exactly fit for Ninja Blender.With 3 months warranty
- for any reason you’re not completely satisfied, please feel free contact with us freely, we will try our best to serve you.
NOTE:
Two conditions must be met at the same time before purchase:
☞ Your original motor base must be 7 fins;
☞ Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Pay attention to before use :
1. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
2. Please check the rubber gasket and be sure it is put snugly into the bottom blade.
(The rubber gasket is used to avoiding a leak)
3. Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
4. Place the replacement blade onto the cup and screw it tightly until you have a good seal.
5. Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Description:
– Item Type: Ninja Blender Replacement Parts for blender
– Blade material: stainless steel
– Blade shape: Cross blade
– Color: Blade 7 Fins
＊ This Ninja Blender Accessories Suit for ＊
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO,
BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W,
BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682,
NN100, NN100A, NN101, NN102, BL2012.
＊ Not fit for ＊
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL820,BL830,
BL450,BL451-70,BL454-70,BL482-70.
【Please check your model carefully before purchasing.】
Packing Including:
1 x Ninja blade Replacement
2 x Extra Gasket Rubber
Similar items with 4 stars and above
Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)
- ♠ Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- ♠Ninja Replacement Blade –7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
- ♠Easy installation -It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused.
- ♠Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- ♠Note2: Be careful of the blade when open the package
Color:Blade 7 Fins
Description:
Item Type: Ninja Blender Replacement Parts for blender
Blade material: stainless steel
Blade shape: Cross blade
＊This Ninja Blender Accessories Suit for:
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
＊Not fit for :
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
NOTE:
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
Place the replacement blade onto the cup and screw it tightly until you have a good seal.
Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Packing including:
1 x Ninja blade Replacement
Nutri Ninja Blender Cups and Blade (7-FINS ONLY) Set | 5-Piece Replacement Parts & Accessories for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Blenders
- ⚠
- BEFORE PURCHASING PLEASE CHECK YOUR EXISTING BLADE BY COUNTING THE FINS IT SHOULD BE 7-FINS AND 4″ (10cm) Diameter
- WHAT YOU WILL GET: Includes, 18 Ounce Cup – 24 Ounce Cup – (2) Sip & Seal Lids – Pro Extractor Replacement Blade for Nutri Ninja Auto iQ Blender
- ⚠
- NOT COMPATIBLE IF “DOB” is listed after the model number on the base of the blander
- COMPATIBILITY: Compatible with L2012, BL2013, BL480, BL481, BL482, BL486CO, BL487, BL488W, BL490, BL491, BL492, BL640, BL641, BL642, BL680A, BL682, NN100, NN101, NN102.
- CLEAN AND SAFE: All of our Nutri Ninja Replacement Parts are BPA free. Made from Tritan Material for Durability and Clarity and Dishwasher Safe.
Best Accessories Nutri Ninja Blender Replacement Parts and Accessories – 5-Piece Cup and Blade Replacement Set
Multiply the fun with our best Nutri Ninja Cups, now available for you and a friend.
WHAT YOU WILL GET:
- 18 Ounce Cup
- 24 Ounce Cup
- (2) Sip & Seal Lids
- Pro Extractor Replacement Blade
Included are three Sip & Seal Lids for enjoying your personalized nutrient-rich juices on the go.
The Pro Extractor Blades are able to crush through whole Fruits, Vegetables, Nuts, Seeds, and Ice.
The Tritan material is crystal clear and durable. And all components are BPA Free and Dishwasher Safe.
The 24oz Tritan Nutri Ninja Cups are compatible with all Ninja Auto-iQ blenders, Ninja Auto-iQ kitchen systems and Ninja Auto-iQ compact systems.
Compatible with: BL2012 – BL2013 – BL480 – BL480D – BL481 – BL482 – BL486CO – BL487 – BL487A – BL488W – BL490 – BL491 – BL492 – BL492W – BL640 – BL641 – BL642 – BL642W – BL642Z – BL680A – BL682 – NN100 – NN100A – NN101 – NN102
Note:
1. The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade.
2. This bottom blade applies to many models, before purchasing, please check your machine, if it is 7 fins and 4 inches, this will fit it.
AxPower 7 Fins Extractor Blades Replacement Part Bottom Blade for Ninjia Blender for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 and More(2 Pack, 7 Fins)
- 【APPLY TO】The 7 fins extractor blade is suitable for Nutri Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz). Please make sure your Ninjia blender base has 7 fins before order.
- 【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape.
- 【IMPORTANT NOTE】Note1: The rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【PACKAGE INCLUDED】 2 x 7 Fins Bottom Blade Replacements, 2 x Extra Gasket Rubbers and 1 x Cleaning Brush as a gift.
- 【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Similar items with 4 stars and above
7 Fins Blender Replacement Bottom Blade For Ninja BL450-30 BL456 BL451 BL454 Auto iQ Pro BL480 BL480D BL685 BL491 BL682 BL491 BL640 BL642 Nutri Blender Parts
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Compatible with Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30 Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682 Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30/BL486CO-30 BL480D Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
- Packing include: 1x7Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket. Be careful of the blade when open the package
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
7 Fins Replacement Blender Blade For Ninja Auto iQ BL480 BL480D BL685 BL491 BL682 BL491 BL640 BL642 Blender
- Compatible with Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30 Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682 Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30/BL486CO-30 Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- Packing include: 1x7Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket. Be careful of the blade when open the package
Replacement Parts for Nutri Ninja Blender Blade, 7 Fins Replacement Blade Parts Extractor Assembly for Nutri Ninja BL480 BL482-30 BL682 BL492 BL450 Models Blender
- ★Ninja Blade Compatibility：7 Fins Ninja Blade Apply to Nutri Ninja Pro BL450-30 BL456-30 BL451-30 BL454-30. Nutri Ninja Auto-iQ BL480-30 BL481-30 BL482-30 BL490-30. Nutri Ninja Auto-iQ Pro Completes BL487-30 BL488W-30 BL487A-30 BL486CO-30. NutriNinja Auto-iQ Compact System BL491-30 BL492-30 BL492W-30. (Please confirm your blender need 7 fins replacement blade before purchasing, other model is not compatible if don’t remark).
- ★Materials&Size:Made of food grade PP and stainless steel, 7 Fins, 4″/10CM diameter, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- ★Usage Note: The rubber gasket on the bottom blade may loose during transportation, so before using the bottom blade, check the rubber gasket and make sure it is tight against the bottom blade
- if you want to use this replacement gasket, remove the bottom blade In the pre-installed gasket.
- ★Range of Use: This stirrer has a unique “stacked blade” assembly consisting of several sharp blades mounted at different heights in the container.BPA Free,make your Juicer reuse again and perfect for all your blending and mixing needs.
- ★100% Satisfaction Guarantee – We’re so confident that you’ll love the Ninja Blender Replacement that we’ll refund every penny if you don’t like it! if you have any problem about it, refund or replace new one quickly, contact us any time for help.
Ninja Blender Replacement Blade Parts Nutri Ninja 7 Fins replacement bottom blade effortlessly pulverizes fruits,vegetables.
BEFORE PURCHASING please check your existing blade for the following
Product Specifications
★- Item Type: Replacement Parts for Nutri Ninja Blender Blade Assembly 7Fins
★- Blade Material: Stainless Steel
★- Blade Shape: Cross Blade
★- Color: Black
★- Diameter: 4″ (10cm) Diameter.
Compatibility
This 7 FINS Nutri Ninja Pro Extractor Blades Assembly Works with these models:
This 7 FINS Nutri Ninja Pro Extractor Blades Assembly Works with these models:
(1) Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
(2) Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682
(3) Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30/BL486CO-30
(4) Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
(Only fit for 18oz, 24oz, 32oz not fit for 16oz)
Tip: Please according to your Nutri Ninja Blender choose 6 fins or 7 fins Ninja Blender Blade.
Similar items with 4 stars and above
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ninja blade replacement for bl487a, eg:
- What are Top 10 ninja blade replacement for bl487a for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ninja blade replacement for bl487a to buy?
- What are Top Rated ninja blade replacement for bl487a to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja blade replacement for bl487a?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja blade replacement for bl487a.
- Before deciding to buy any ninja blade replacement for bl487a, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ninja blade replacement for bl487a and What you should consider when buying the ninja blade replacement for bl487a and Where to Buy or Purchase the ninja blade replacement for bl487a. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ninja blade replacement for bl487a of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja blade replacement for bl487a.
Conclusion
By our suggestions above, we hope that you can found ninja blade replacement for bl487a for you.Please don’t forget to share your experience by comment in this post. Thank you!
