The 10 Best Refrigerator Cold Weather Kit

Product Description

This is a genuine replacement part. The model number and name for the following item is: Garage Heater Kit 5303918301 Frigidaire heating element.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Garage Heater Kit 5303918301 Frigidaire heating element

Product description

Frigidaire FRIGIDAIRE 5303918301 GARAGE REFRIGERATOR HEATER KIT

From the Manufacturer

Frigidaire 5303918301 Garage Kit for Refrigerator. Works with Frigidaire FFH1767GW, Frigidaire FRS3HR5HW, Frigidaire FRS3R5EMB, Frigidaire FRS6HR5HW, Frigidaire FRS6R5EMB, Frigidaire FRT17B3AW, Frigidaire FRT18IS6CB. Genuine Replacement Part.

Now Standard on Select Norcold Gas Absorption RV Refrigerators!Factory installed Cold Weather Kits now come standard on NXA641.3R & NXA841.3R gas absorption refrigerators, allowing them to opperate in ambient temperatures down to 0°F. With the Cold Weather Kit, Norcold refigerators can help extend your camping season, along with supporting full-timers and those using RV’s for worksite living. Cold Weather Kit can be retrofitted to Norcold 6-, 8-, 10-, 12- abd 17-cu. ft. gas absorption models.

This is Non-OEM product.. The model number and name for the following items: Garage Heater Kit 5303918301 AP3722172 PS900213 AH900213 Frigidaire heating element.

The garage heater kit is installed in the refrigerator section next to the thermostat & defrost timer.
Note: This is not designed to work with side-by-side, counter-depth refrigerators, models with electronic controls, or those made before 2001. Only top freezer refrigerator models can use this heater designed for those put in garages or basements where the temperature drops to 34 degrees Fahrenheit.

Before working on your appliance, make sure that it is unplugged.

Below are step by step instructions on how to install the garage heater kit.
1.Unplug the refrigerator from electrical oulet.
2.Remove 4 screws holding control box to cabinet.
3.Unplug the Molex connector.
4.Remove 2 screws holding defrost timer to control box.
5.Pull back defrost timer.
6.Bend the heater into a U shape.
7.Peel off the paper backing of heater.
8.Align heater holes with defrost timer mounting pegs. Place heater against control box and press down over full surface of heater.
9.Set defrost timer back into position and screw in place.
10.Unplug 2 leads from cold control(Orange and Black wires).
11. Plug orange lead to orange heater lead, then back onto cold control.
12.Plug black lead to blace heater lead, then back to cold control.
13.Reinstall cold control box by first plugging in Molex connector.
14.Screw control box back into refrigerator cabinet using 4 screws you removed ealier.
15.Plug refrigerator into electrical outlet.

Note: Make sure the refrigerator is working properly.

Note: Make sure the refrigerator is working properly.
This is not designed to work with side-by-side, counter-depth refrigerators, models with electronic controls, or those made before 2001. Only top freezer refrigerator models can use this heater designed for those put in garages or basements where the temperature drops to 34 degrees Fahrenheit.

Before working on your appliance, make sure that it is unplugged.

Below are step by step instructions on how to install the garage heater kit
1.Unplug the refrigerator from electrical oulet.
2.Remove 4 screws holding control box to cabinet.
3.Unplug the Molex connector.
4.Remove 2 screws holding defrost timer to control box.
5.Pull back defrost timer.
6.Bend the heater into a U shape.
7.Peel off the paper backing of heater.
8.Align heater holes with defrost timer mounting pegs. Place heater against control box and press down over full surface of heater.
9.Set defrost timer back into position and screw in place.
10.Unplug 2 leads from cold control(Orange and Black wires).
11. Plug orange lead to orange heater lead, then back onto cold control.
12.Plug black lead to blace heater lead, then back to cold control.
13.Reinstall cold control box by first plugging in Molex connector.
14.Screw control box back into refrigerator cabinet using 4 screws you removed ealier.
15.Plug refrigerator into electrical outlet.

This is an O.E.M authorized part. Fits various Frigidaire models. Oem part number 5303918301. Made in united states.

This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. You will never have to spend money on small, ineffective and expensive refrigerator filters ever again.

This icemaker kit includes everything you will need to quickly and easily connect your refrigerator and reverse osmosis system. It includes one JG quick-connect “Tee” fitting, one JG quick-connect shut off ball valve and 20 feet of JG ¼” food-grade poly tubing. The “Tee” fitting diverts the RO purified water between the fridge and RO faucet giving access to both outlets. The ball valve can be used to shut off water flow to the fridge.

Kit includes
(1) * JG ¼” Tee quick-connect fittings
(1) * JG ¼” Shut off valve
(1) * JG ¼” Tubing (20 ft)

Works for all APEC ROES-50, ROES-PH75, ROES-UV75, RO-45, RO-90, RO-PERM and RO-PUMP systems, and most standard under-counter reverse osmosis systems using ¼” tubing and connectors.

For over 20 years, APEC has been an industry leading manufacturer of high performance RO systems.

APEC Water does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water products from Amazon or APEC Water directly for authenticity.

Conclusion

By our suggestions above, we hope that you can found refrigerator cold weather kit for you.Please don’t forget to share your experience by comment in this post. Thank you!