The 9 Best Uxcell Heating Cartridge 8

Features:
Quick acting design protects electrical system components and wiring.
Mainly used for protecting the electrical circuit against overload and short circuit, it also derive for protecting the semiconductor objects.

NOTE:
1. Shut down power before your replacement.
2. Check your original size of fuse before buying: body diameter, body length, rated current, rated voltage.

Specifications:
Material: Ceramic Tube, Nickel-plated Brass End Cap
Rated Voltage: 250 Volt
Rated Current: 8 Amp
Diameter: 5mm / 0.2 inch
Length: 20mm / 0.8 inch

Package Contents:
5 x Replacement Fuses

Features:
Quick acting design protects electrical system components and wiring.
Mainly used for protecting the electrical circuit against overload and short circuit, it also derive for protecting the semiconductor objects.

NOTE:
1. Shut down power before your replacement.
2. Check your original size of fuse before buying: body diameter, body length, rated current, rated voltage.

Specifications:
Material: Ceramic Tube, Nickel-plated Brass End Cap
Rated Voltage: 250 Volt
Rated Current: 8 Amp
Diameter: 6mm / 0.24 inch
Length: 30mm / 1.18 inch

Package Contents:
10 x Replacement Fuses

Features：
This item is most frequently used for heating metal parts by insertion into drilled holes. Easy installation, the heaters are made slightly undersize relative to their nominal diameter.
Use a watt density only as high as needed. Take advantage of the safety margin provided by using ratings less than the maximum allowed. Select space heaters for most even heat pattern rather than the highest possible wattage per heater.
Various diameters allow for it to be used in any cavity and can be custom designed with any cold section. Lead wires extend from the end to your control panels.
Cartridge heaters are used for heating Dies, Moulds, Platens and various other applications demanding localised heating

Specification:
Tube Diameter:12mm
Tube Length:120mm
Wire Length: 300mm
Material:304 stainless steel
Rated Voltage: AC 110V
Rated Vatt: 350W
Connection Type: Wire Leads

Package Content:
1 x Cartridge Heater

Features：
This item is most frequently used for heating metal parts by insertion into drilled holes. Easy installation, the heaters are made slightly undersize relative to their nominal diameter.
Use a watt density only as high as needed. Take advantage of the safety margin provided by using ratings less than the maximum allowed. Select space heaters for most even heat pattern rather than the highest possible wattage per heater.
Various diameters allow for it to be used in any cavity and can be custom designed with any cold section. Lead wires extend from the end to your control panels.
Cartridge heaters are used for heating Dies, Moulds, Platens and various other applications demanding localised heating

Specification:
Tube Diameter: 9mm
Tube Length: 190mm
Wire Length: 300mm
Material:304 stainless steel
Rated Voltage: AC 110V
Rated Vatt: 350W
Connection Type: Wire Leads

Package Content:
1 x Cartridge Heater

This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)

Nichrome is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.

Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc.

Provides high heat transfer, stainless steel heater is corrosion resistant.

Note: as the voltage is AC 110V, please make sure it can work in your area well before ordering.

Package Content : 3 x cartridge heater

Conclusion

By our suggestions above, we hope that you can found uxcell heating cartridge 8 for you.Please don’t forget to share your experience by comment in this post. Thank you!