homeplusexpress 
Nowadays, there are so many products of water filter 2.5 x 9.875 in the market and you are wondering to choose a best one. You have searched for water filter 2.5 x 9.875 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter 2.5 x 9.875 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
49,756 Reviews Scanned
Aquaboon 1-Micron Sediment Water Filter Cartridge, 4-Pack
- ???? [Dimensions] 10 inches x 2. 5 inches – 4 Pack Of 1 Micron Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridges. Universal water filter replacement fits any standard 10 inch RO and whole house system.
- ???? [Quality Filtration] Made of thermally bonded 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. 5 zones of filtration to ensure quality and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [Compatible] Compatible with: Aqua Pure AP110, AP110-NP, AP101S, AP101T, AP11S, AP11T, AP12S, AP1610, AP2610, AP51T, SS1-SS12, SS20-SS36, GE FXUSC, Whirlpool WHKF-GD05, WHKF-DWHV, Culligan P5, P5-D, P5A, HF-150, HF-160, HF-360 and DuPont WFPFC5002. Compatible with reverse osmosis filter systems of brands: GE, Culligan, Dupont, Kenmore, Omnifilter, Whirlpool, etc.
- ???? [Lifetime] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace to keep pleasant taste of your water.
Block Activated Carbon Coconut Shell Water Filter Cartridge 5 Micron for RO & Standard 10” Housing WELL-MATCHED with WFPFC8002, WFPFC9001, WHCF-WHWC, WHEF-WHWC, FXWTC, SCWH-5 (2 Pack)
- ???? Keeps water fresh by reducing and removing iron, manganese, chlorine, hydrogen sulfide, herbicides, pesticides, and other industrial chemicals
- ???? WELL-MATCHED Models of Cartridges: Watts Premier MAXETW-975, WCBCS975-RV, DuPont WFPFC8002 and WFPFC9001, SCWH-5, Tier1 EP5_10, Whirlpool WHA2BF5, Water Filter Tree WWC105, Pentek CBC-10, GE FXWTC, WFD WF-CB105, Culligan D-10A & D-10, EcoPure EPW2C, Aquaboon CTO, Purenex 5C, 4C, C-5M, Cornelius COR10B1, Neo-Pure CTO1-2510, COR10B5, KleenWater KWGE25RG and KW2510CB, WFDWC30001, Omnipure OMB934-5M, WFPFC9001, Everpure CG5-10, MatriKX 32-250-10-GREEN and E32-250-125-975, DEV9108-15, iSpring FC15
- ???? This filter is ideal for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing
- ???? This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 9.875 inches x 2.5 inches (25.7 cm x 6.35 cm)
- ???? WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Pentek 158643 3/8, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2
- iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB, Ronaqua LEPAC10676, RA-125-10D-PP-CTO, RA-US-2
Similar items with 4 stars and above
Aquaboon 5MIC-4PK 5-Micron Sediment Water Filter Cartridge 4-Pack
- ???? [Dimensions] 10 inches x 2. 5 inches – 4 Pack Of 5 Micron Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridges. Universal water filter replacement fits any standard 10 inch RO and whole house system.
- ???? [Quality Filtration] Made of thermally bonded 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. 5 zones of filtration to ensure quality and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [Compatible] Compatible with: Aqua Pure AP110, AP110-NP, AP101S, AP101T, AP11S, AP11T, AP12S, AP1610, AP2610, AP51T, SS1-SS12, SS20-SS36, GE FXUSC, Whirlpool WHKF-GD05, WHKF-DWHV, Culligan P5, P5-D, P5A, HF-150, HF-160, HF-360 and DuPont WFPFC5002. Compatible with reverse osmosis filter systems of brands: GE, Culligan, Dupont, Kenmore, Omni filter, Whirlpool, etc.
- ???? [Lifetime] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace to keep pleasant taste of your water.
Pentek WP-5 String-Wound Polypropylene Filter Cartridge, 9-7/8" x 2-1/4", 5 Micron
- Reduces sand, silt, scale, and rust particles in residential and municipal drinking water and industrial fluid applications
- Nominal filtration rating of 5 microns
- Polypropylene cord precisely wound on a rigid core for high dirt-loading capacity
- Initial pressure drop of less than 2.5 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek WP-5 string-wound polypropylene filter cartridge reduces fine sediment, rust, and scale particles for municipal drinking water and industrial fluid applications. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of polypropylene fiber cord that is wound in a precise pattern on a rigid polypropylene core for greater surface area, providing a higher dirt-loading capacity than standard wound cartridges. It has an initial pressure drop of less than 2.5 pounds per square inch (psi) at a maximum flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This string-wound filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 5 microns |
| Initial pressure drop at 10 gpm | 2.5 psi |
| Operating temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 9-7/8 x 2-1/4 inches (251 x 60 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek PD-25-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 25 Microns
- Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications
- Nominal filtration rating of 25 microns
- Bonded polypropylene microfiber for resistance to chemicals and bacteria
- Initial pressure drop of less than 2 psi at a flow rate of 2 gpm
- Temperature range of 40 to 175 degrees F (4.4 to 79.4 degrees C)
This Pentek PD-25-934 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. It has a nominal filtration rating of 25 microns at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. It has an initial pressure drop of less than 2 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 175 degrees F (4.4 to 79.4 degrees C). This polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.
Specifications
| Nominal filtration rating | 25 microns |
| Initial pressure drop at 2 gpm | <2> |
| Temperature range | 40 to 175 degrees F (4.4 to 79.4 degrees C) |
| Maximum dimensions (H x W) | 9-7/8 x 2-1/2 inches (251 x 64 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
6 Block Activated Carbon 5 Micron Water Filters Set
- SET OF 6 5 MICRON ACTIVATED CARBON BLOCK FILTERS
- THIS IS A FILTER FOR A STANDARD REVERSE OSMOSIS WATER FILTRATION UNIT OR ANY TYPE OF WATER FILTRATION UNIT WITH 10″ HOUSING
- LIFETIME: REPLACE TWO OR THREE TIMES A YEAR, DEPENDING ON THE WATER QUALITY
- THIS FILTER IS WRAPPED AND SEALED AND MEETS NSF STANDARDS AND REGULATIONS
- DIMENSIONS: 9.875″ X 2.5″
Hydronix CB-25-1001 NSF Carbon Block Filter 2.5" OD X 9 7/8" Length, 1 Micron
- Carbon block filter for a water filtration system
- 2.5″ OD and an overall length of 9-7/8″
- Coconut shell carbon filter media with polypropylene outer/inner wrap, end caps and netting
- Particle retention size of 1 micron
- Meets ANSI/NSF Standard 42 certification for material requirements only
This Hydronix CB-25-1001 carbon block filter has a particle retention size of 1 micron, and is suitable for drinking water filtration applications. It has coconut shell activated carbon filter media to reduce unpleasant taste and odor from drinking water. This filter has a 2.5″ outside diameter (OD) and an overall length of 9-7/8″. It has an operating temperature range of 40 to 180 degrees F, and a maximum pressure rating of 250 pounds per square inch (psi). This carbon block filter is certified by the National Sanitation Foundation (NSF) Standard 42 for material requirements only, and is suitable for use in water dispensing applications where higher chlorine levels are present.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Hydronix Water Technology is a supplier of water filtration, purification and separation products. The company, founded in 2010, is headquartered in Chino Hills, CA.
Similar items with 4 stars and above
Hydronix SDC-25-1001 NSF Sediment Filter 2.5" OD X 9 7/8" Length, 1 Micron (Pack of 1)
Neo-Pure CHLM-2510 9-7/8 x 2-1/2 Chloramine Carbon Block Water Filter 1 mic
Neo-Pure CHLM-2510 9-7/8 x 2-1/2 Chloramine Carbon Block Water Filter 1 micron – Single. Neo-Pure CHLM-2510 9-7/8 x 2-1/2 Chloramine Carbon BlockFilter 1 micron: Neo-Pure CHLM-2510 9-7/8 x 2-1/2 Chloramine Carbon BlockFilter 1 micron: The Neo-Pure CHLM-2510 Chloramine Carbon Block Water Filter is manufactured using coconut shell carbon for improved reduction of chloramine chlorine taste and odor and sediment. The CHLM-2510 chloramine filteris ideal for use as a reverse osmosis prefilter or postfilter and all materials are FDA compliant so they are an excellent choice for many residential food service and commercial drinking water applications. Most economical solution for reducing chloramine chlorine taste and odor Efficient filter cartridge with high adsorptive capacity All materials and components are FDA compliant Low pressure drop Filter Media: coconut shell carbon block Micron Rating:1 micron Filter Life: 1000 gallons @ 1 gpm NSF 42 Certified Made in the USA Neo-Pure CHLM-2510 Chloramine Carbon Block Water Filter Specifications 10 Replacement Filter Cartridges Replacement Parts for Ideal H2O 1400 GPD De-Chlorinator System Replacement Parts for Hydro-logic StealthRO 100 & 200 Systems Chloramine in Water Neo-Pure CHLM 1 Micron Chloramine Carbon Block Water Filters Neo-Pure Carbon Filters for SFN-1 Housings Neo-Pure Carbon Filters for SFR1 Housings Neo-Pure Carbon Filters for RHS-78 Housings Neo-Pure Carbon Filters for FOS-78 Housings Replacement Parts for Hydro-logic StealthRO 100 & 200 Systems Replacement Cartridges for Ideal H20 Reverse Osmosis Systems Replacement Parts for Ideal H2O 1400 GPD De-Chlorinator System
Stage 2 Granular Activated Carbon Filter for under-sink RO filtration drinking water system – 10 inch, 2.5" OD X 9-7/8" L (GAC-1025)
- Meets and exceeds NSF standard
- Made in Taiwan
- 2nd stage premium granular activated coconut shell carbon filter
- Removes chlorine, chloramines, tastes and odors, cloudiness, and colors
- Fits most industry standard 10-Inch under-sink filter housings
- Protechs downstream RO membrane
Premium Replacement Filter for Under-Sink RO Drinking Water Systems
·Removes chlorine, chloramines, tastes and odors, cloudiness, and colors
·Specifically designed and optimized for undersink drinking water filters and RO filtration systems
Superior Built Quality
· Made of premium granular activated coconut shell carbon
· Built to the OEM specifications, and equal to or greater than the OEM quality
Easy Installation
· Dimensions: 2.5″ OD X 9-7/8″ L
· Used as the filter between sediment filter and RO membrane filter in the RO systems
· Works with most brands of under counter RO systems that use industry standard size 10″ housings
· Recommend changing every 6 to 9 months, depending on incoming water quality
Conclusion
By our suggestions above, we hope that you can found water filter 2.5 x 9.875 for you.Please don’t forget to share your experience by comment in this post. Thank you!
