The 9 Best Water Hammer Arrestor Ice Maker

Product Description

The HammerSTOP supply line hose eliminates water hammer (banging pipes) with an in-line patented piston that absorbs unexpected surges in water pressure. The HammerSTOP features a water hammer arrester built into a 5 ft. supply line for an ice maker. Unlike any other water connector hose, HammerSTOP features a proprietary UltraCore liner, resistant to chemicals and leaves no odor or taste in the water; it’s also lead and BPA free!

From the Manufacturer

Danco is one of the largest plumbing repair, replacement and remodel suppliers in the home improvement industry.  We are largely focused on empowering Do It Yourself consumers with affordable plumbing products and solutions which create new and refreshing décors for bathrooms and kitchens.

SharkBite Ice Maker Outlet Box with Water Hammer Arrestors
The SharkBite Ice Maker Outlet Box with SharkBite quarter turn push-to-connect fittings allow for simple installation of a water main supply line with a quick and easy shutoff valve for refrigerator, ice maker, and water dispensers. This product is lead-free compliant and is offered with water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite lead free quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

Type: Tee Application: Plumbing Size: 1/4 Inch Connection Type: OD Compression Max. Working Pressure: 350 psi Max Temp (F): 250F Material: Copper Features: Lead Free.

This Eastman 60242 Crimp PEX Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

3/8″ Compression x 3/8″ Female Compression, Mini Rester Residential Water Hammer Arrester, 3/8″ OD x 3/8″ Reverse Nut Tee, For 3/8″ OD Compression Stop Valve For Hot Or Cold Piping, Stops Pipe Banging, Reduces Strain On Plumbing System Joints, Perfect For Dishwasher Connections, Shall Be Installed Where Required On Supply Valves, Specifically Sized and Have Sufficient Volume Of Air To Dissipate The Calculated Kinetic Energy Generated By Closing, Code Requirement In Some Southeast Cities.

Most people don’t know about Everflow mini rester copper water hammer arrestor tee with 1/4 inch outer dimension compression x 1/4 inch outer dimension female compression Type AA connections. Whether it is hot or cold, the hammer arrestor tee can do wonder for the noise-prone pipe system in a residential environment. The banging in pipes can basically be solved by installing mini-rester whether it is horizontal or vertical. Most plumbing symptom of banging occurs due to the high-pressure rush or surge of water flowing through the pipe rapidly. The sudden reversal of flow send shock waves can put pressure on the pipes causing damage in certain places such as joints. The hammer arrestor with a piston in the air chamber comes to the rescue by relieving pressure inside the pipes. The water inside the air chamber pushes the piston in by compressing the air to subsides the pressure. The compression connection of the water arrestor are generally flexible and can be installed in any direction whether horizontally or vertically. The tee size AA compression of 1/4 inch connects with compression pipe for a tight seal to prevent water leaks. The maximum working temperature can handle 180 Fahrenheit and working pressure of 60 PSI. You’ll be glad that the water flowing in the pipes ensures a noise-free environment providing some peace of mind. Everflow HR-AA-14COMP-NL water hammer arrestor long-lasting performance complies with NSF-61. The construction of mini rester is made of DZR brass, lead-free and meets UPC, IPC and cUPC requirements.

Sioux Chief OX Box Icemaker Outlet Box with 1/4-turn ball valve and water hammer arrestor. Valve inlet connection is 1/2″ PEX (crimp style) Valve outlet connection is 1/4″ OD Compression (outlet).

Conclusion

By our suggestions above, we hope that you can found water hammer arrestor ice maker for you.Please don’t forget to share your experience by comment in this post. Thank you!